PIPEN=B_0x0, DTMODE=B_0x0, PIPEDIFF=B_0x0, FDTFEN=B_0x0
DCMIPP Pipe1 flow selection configuration register
| DTIDA | Data type selection ID A |
| DTIDB | Data type selection ID B |
| DTMODE | Flow selection mode 0 (B_0x0): Only flow DTIDA from the selected virtual channel is forwarded in the pipe 1 (B_0x1): Flows DTIDA and/or DTIDB from the selected virtual channel are forwarded in the pipe |
| PIPEDIFF | Differentiates Pipe2 from Pipe1 0 (B_0x0): Pipe2 receives the same data as Pipe1 (Ie data filtered by Pipe1 configuration for VC and DTIDA/DTIDB and DTMODE mode, as well as FDTF and FDTFEN bit). 1 (B_0x1): Pipe1 gets pixels from only VC and DT configured in Pipe1, processed by all block belonging to the image processing functional block (ie, demosaicing, auto exposure, statistics, contrast enhancement). |
| VC | Flow selection mode |
| FDTF | Force Datatype format. |
| FDTFEN | Force Datatype format enable. 0 (B_0x0): Disable force Datatype format. The Datatype format used by the pipe is the one defined into DTIDx1: Enable force Datatype format. When the Datatype DTIDx is detected by the pipe, the real pixel format considered by the pipe is the one set into the FDTF[5:0] bit field instead of the physical one received by the CSI2 Host. It allows to handle, for instance, 3D sensors camera using user data type in bottom-up approach, and to explicitly define the pixel format to be handled by the pipe. Note that the flow is first selected using the DTMODE and DTIDA/B, and then, if selected, its data type may be forced with the to FDTC using FDTFEN = 1. |
| PIPEN | Activation of PipeN 0 (B_0x0): Pipe disabled 1 (B_0x1): Pipe enabled, can start capturing with CPTMODE, CPTREQ, CPTACK |