TYPEC_VSTATE_CC2=B_0x0, RXERR=B_0x0, FRSEVT=B_0x0, TXMSGSENT=B_0x0, HRSTSENT=B_0x0, TXMSGDISC=B_0x0, RXMSGEND=B_0x0, RXHRSTDET=B_0x0, TXMSGABT=B_0x0, RXOVR=B_0x0, RXNE=B_0x0, TYPECEVT1=B_0x0, RXORDDET=B_0x0, TXUND=B_0x0, HRSTDISC=B_0x0, TXIS=B_0x0, TYPECEVT2=B_0x0, TYPEC_VSTATE_CC1=B_0x0
UCPD status register
| TXIS | Transmit interrupt status 0 (B_0x0): New Tx data write not required 1 (B_0x1): New Tx data write required |
| TXMSGDISC | Message transmission discarded 0 (B_0x0): No Tx message discarded 1 (B_0x1): Tx message discarded |
| TXMSGSENT | Message transmission completed 0 (B_0x0): No Tx message completed 1 (B_0x1): Tx message completed |
| TXMSGABT | Transmit message abort 0 (B_0x0): No transmit message abort 1 (B_0x1): Transmit message abort |
| HRSTDISC | Hard Reset discarded 0 (B_0x0): No Hard Reset discarded 1 (B_0x1): Hard Reset discarded |
| HRSTSENT | Hard Reset message sent 0 (B_0x0): No Hard Reset message sent 1 (B_0x1): Hard Reset message sent |
| TXUND | Tx data underrun detection 0 (B_0x0): No Tx data underrun detected 1 (B_0x1): Tx data underrun detected |
| RXNE | Receive data register not empty detection 0 (B_0x0): Rx data register empty 1 (B_0x1): Rx data register not empty |
| RXORDDET | Rx ordered set (4 K-codes) detection 0 (B_0x0): No ordered set detected 1 (B_0x1): A new ordered set detected |
| RXHRSTDET | Rx Hard Reset receipt detection 0 (B_0x0): Hard Reset not received 1 (B_0x1): Hard Reset received |
| RXOVR | Rx data overflow detection 0 (B_0x0): No overflow 1 (B_0x1): Overflow |
| RXMSGEND | Rx message received 0 (B_0x0): No new Rx message received 1 (B_0x1): A new Rx message received |
| RXERR | Receive message error 0 (B_0x0): No error detected 1 (B_0x1): Error(s) detected |
| TYPECEVT1 | Type-C voltage level event on CC1 line 0 (B_0x0): No new event 1 (B_0x1): A new Type-C event |
| TYPECEVT2 | Type-C voltage level event on CC2 line 0 (B_0x0): No new event 1 (B_0x1): A new Type-C event |
| TYPEC_VSTATE_CC1 | The status bitfield indicates the voltage level on the CC1 line in its steady state. 0 (B_0x0): Lowest 1 (B_0x1): Low 2 (B_0x2): High 3 (B_0x3): Highest |
| TYPEC_VSTATE_CC2 | CC2 line voltage level 0 (B_0x0): Lowest 1 (B_0x1): Low 2 (B_0x2): High 3 (B_0x3): Highest |
| FRSEVT | FRS detection event 0 (B_0x0): No new event 1 (B_0x1): New FRS receive event occurred |