GPIO port output data register
| OD0 | Port output data I/O pin y These bits can be read and written by software. Note: For atomic bit set/reset, these bits can be individually set and/or reset by writing to�GPIOx_BSRR or GPIOx_BRR (x = A to J). Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. |
| OD1 | Port output data I/O pin y These bits can be read and written by software. Note: For atomic bit set/reset, these bits can be individually set and/or reset by writing to�GPIOx_BSRR or GPIOx_BRR (x = A to J). Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. |
| OD2 | Port output data I/O pin y These bits can be read and written by software. Note: For atomic bit set/reset, these bits can be individually set and/or reset by writing to�GPIOx_BSRR or GPIOx_BRR (x = A to J). Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. |
| OD3 | Port output data I/O pin y These bits can be read and written by software. Note: For atomic bit set/reset, these bits can be individually set and/or reset by writing to�GPIOx_BSRR or GPIOx_BRR (x = A to J). Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. |
| OD4 | Port output data I/O pin y These bits can be read and written by software. Note: For atomic bit set/reset, these bits can be individually set and/or reset by writing to�GPIOx_BSRR or GPIOx_BRR (x = A to J). Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. |
| OD5 | Port output data I/O pin y These bits can be read and written by software. Note: For atomic bit set/reset, these bits can be individually set and/or reset by writing to�GPIOx_BSRR or GPIOx_BRR (x = A to J). Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. |
| OD6 | Port output data I/O pin y These bits can be read and written by software. Note: For atomic bit set/reset, these bits can be individually set and/or reset by writing to�GPIOx_BSRR or GPIOx_BRR (x = A to J). Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. |
| OD7 | Port output data I/O pin y These bits can be read and written by software. Note: For atomic bit set/reset, these bits can be individually set and/or reset by writing to�GPIOx_BSRR or GPIOx_BRR (x = A to J). Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. |
| OD8 | Port output data I/O pin y These bits can be read and written by software. Note: For atomic bit set/reset, these bits can be individually set and/or reset by writing to�GPIOx_BSRR or GPIOx_BRR (x = A to J). Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. |
| OD9 | Port output data I/O pin y These bits can be read and written by software. Note: For atomic bit set/reset, these bits can be individually set and/or reset by writing to�GPIOx_BSRR or GPIOx_BRR (x = A to J). Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. |
| OD10 | Port output data I/O pin y These bits can be read and written by software. Note: For atomic bit set/reset, these bits can be individually set and/or reset by writing to�GPIOx_BSRR or GPIOx_BRR (x = A to J). Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. |
| OD11 | Port output data I/O pin y These bits can be read and written by software. Note: For atomic bit set/reset, these bits can be individually set and/or reset by writing to�GPIOx_BSRR or GPIOx_BRR (x = A to J). Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. |
| OD12 | Port output data I/O pin y These bits can be read and written by software. Note: For atomic bit set/reset, these bits can be individually set and/or reset by writing to�GPIOx_BSRR or GPIOx_BRR (x = A to J). Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. |
| OD13 | Port output data I/O pin y These bits can be read and written by software. Note: For atomic bit set/reset, these bits can be individually set and/or reset by writing to�GPIOx_BSRR or GPIOx_BRR (x = A to J). Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. |
| OD14 | Port output data I/O pin y These bits can be read and written by software. Note: For atomic bit set/reset, these bits can be individually set and/or reset by writing to�GPIOx_BSRR or GPIOx_BRR (x = A to J). Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. |
| OD15 | Port output data I/O pin y These bits can be read and written by software. Note: For atomic bit set/reset, these bits can be individually set and/or reset by writing to�GPIOx_BSRR or GPIOx_BRR (x = A to J). Note: This bit is reserved and must be kept at reset value when the corresponding I/O is not available on the selected package. |