INTERRUPT1ENABLEREG register
| ADDPOINTERROR | Address Pointer Error enable interruption |
| RXOVERFLOWERROR | Rx Overflow Error enable interruption |
| SEQDONE | Sequencer end of task enable interruption |
| TXERROR_0 | Transmission error 0 enable interruption |
| TXERROR_1 | Transmission error 1 enable interruption |
| TXERROR_2 | Transmission error 2 enable interruption |
| TXERROR_3 | Transmission error 3 enable interruption |
| TXERROR_4 | Transmission error 4 enable interruption |
| ENCERROR | Encryption error on receive enable interruption |
| ALLTABLEREADYERROR | All RAM Table not ready enable interruption |
| TXDATAREADYERROR | Transmit data pack not ready enable interruption |
| NOACTIVELERROR | active bit error enable interruption |
| RCVLENGTHERROR | Receive length error enable interruption |
| SEMATIMEOUTERROR | Semaphore timeout error enable interruption |
| TXRXSKIP | Transmission/Reception skip enable interruption |
| ACTIVE2ERROR | Active2 Radio state error enable interruption |
| CONFIGERROR | Data pointer configuration error enable interruption |
| TXOK | Previous transmitted packet received OK enable interruption |
| DONE | Receive/Transmit done interruption |
| RCVTIMEOUT | Receive timeout enable interruption (no preamble found) |
| RCVNOMD | Received MD bit embedded in the PDU data packet header was zero enable interruption |
| RCVCMD | Received command enable interruption |
| TIMECAPTURETRIG | TimerCaptureReg time capture enable interruption |
| RCVCRCERR | Receive data fail enable interruption |
| RCVOK | Receive data OK enable interruption |