OT15=B_0x0, OT10=B_0x0, OT13=B_0x0, OT5=B_0x0, OT11=B_0x0, OT2=B_0x0, OT0=B_0x0, OT3=B_0x0, OT4=B_0x0, OT7=B_0x0, OT6=B_0x0, OT8=B_0x0, OT1=B_0x0, OT9=B_0x0, OT12=B_0x0, OT14=B_0x0
GPIO port B output type register
| OT0 | Port configuration I/O pin y These bits are written by software to configure the I/O output type. Access can be protected by GPIOB SECy. Note that bit 10 is reserved on STM32WBA55xx devices. 0 (B_0x0): Output push-pull (reset state) 1 (B_0x1): Output open-drain |
| OT1 | Port configuration I/O pin y These bits are written by software to configure the I/O output type. Access can be protected by GPIOB SECy. Note that bit 10 is reserved on STM32WBA55xx devices. 0 (B_0x0): Output push-pull (reset state) 1 (B_0x1): Output open-drain |
| OT2 | Port configuration I/O pin y These bits are written by software to configure the I/O output type. Access can be protected by GPIOB SECy. Note that bit 10 is reserved on STM32WBA55xx devices. 0 (B_0x0): Output push-pull (reset state) 1 (B_0x1): Output open-drain |
| OT3 | Port configuration I/O pin y These bits are written by software to configure the I/O output type. Access can be protected by GPIOB SECy. Note that bit 10 is reserved on STM32WBA55xx devices. 0 (B_0x0): Output push-pull (reset state) 1 (B_0x1): Output open-drain |
| OT4 | Port configuration I/O pin y These bits are written by software to configure the I/O output type. Access can be protected by GPIOB SECy. Note that bit 10 is reserved on STM32WBA55xx devices. 0 (B_0x0): Output push-pull (reset state) 1 (B_0x1): Output open-drain |
| OT5 | Port configuration I/O pin y These bits are written by software to configure the I/O output type. Access can be protected by GPIOB SECy. Note that bit 10 is reserved on STM32WBA55xx devices. 0 (B_0x0): Output push-pull (reset state) 1 (B_0x1): Output open-drain |
| OT6 | Port configuration I/O pin y These bits are written by software to configure the I/O output type. Access can be protected by GPIOB SECy. Note that bit 10 is reserved on STM32WBA55xx devices. 0 (B_0x0): Output push-pull (reset state) 1 (B_0x1): Output open-drain |
| OT7 | Port configuration I/O pin y These bits are written by software to configure the I/O output type. Access can be protected by GPIOB SECy. Note that bit 10 is reserved on STM32WBA55xx devices. 0 (B_0x0): Output push-pull (reset state) 1 (B_0x1): Output open-drain |
| OT8 | Port configuration I/O pin y These bits are written by software to configure the I/O output type. Access can be protected by GPIOB SECy. Note that bit 10 is reserved on STM32WBA55xx devices. 0 (B_0x0): Output push-pull (reset state) 1 (B_0x1): Output open-drain |
| OT9 | Port configuration I/O pin y These bits are written by software to configure the I/O output type. Access can be protected by GPIOB SECy. Note that bit 10 is reserved on STM32WBA55xx devices. 0 (B_0x0): Output push-pull (reset state) 1 (B_0x1): Output open-drain |
| OT10 | Port configuration I/O pin y These bits are written by software to configure the I/O output type. Access can be protected by GPIOB SECy. Note that bit 10 is reserved on STM32WBA55xx devices. 0 (B_0x0): Output push-pull (reset state) 1 (B_0x1): Output open-drain |
| OT11 | Port configuration I/O pin y These bits are written by software to configure the I/O output type. Access can be protected by GPIOB SECy. Note that bit 10 is reserved on STM32WBA55xx devices. 0 (B_0x0): Output push-pull (reset state) 1 (B_0x1): Output open-drain |
| OT12 | Port configuration I/O pin y These bits are written by software to configure the I/O output type. Access can be protected by GPIOB SECy. Note that bit 10 is reserved on STM32WBA55xx devices. 0 (B_0x0): Output push-pull (reset state) 1 (B_0x1): Output open-drain |
| OT13 | Port configuration I/O pin y These bits are written by software to configure the I/O output type. Access can be protected by GPIOB SECy. Note that bit 10 is reserved on STM32WBA55xx devices. 0 (B_0x0): Output push-pull (reset state) 1 (B_0x1): Output open-drain |
| OT14 | Port configuration I/O pin y These bits are written by software to configure the I/O output type. Access can be protected by GPIOB SECy. Note that bit 10 is reserved on STM32WBA55xx devices. 0 (B_0x0): Output push-pull (reset state) 1 (B_0x1): Output open-drain |
| OT15 | Port configuration I/O pin y These bits are written by software to configure the I/O output type. Access can be protected by GPIOB SECy. Note that bit 10 is reserved on STM32WBA55xx devices. 0 (B_0x0): Output push-pull (reset state) 1 (B_0x1): Output open-drain |