LSI1RDYIE=B_0x0, PLL1RDYIE=B_0x0, HSIRDYIE=B_0x0, HSERDYIE=B_0x0, LSERDYIE=B_0x0
RCC clock interrupt enable register
| LSI1RDYIE | LSI1 ready interrupt enable Set and cleared by software to enable/disable interrupt caused by the LSI1 oscillator stabilization. Access to the bit can be secured by RCC LSISEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV. 0 (B_0x0): LSI1 ready interrupt disabled 1 (B_0x1): LSI1 ready interrupt enabled |
| LSERDYIE | LSE ready interrupt enable Set and cleared by software to enable/disable interrupt caused by the LSE oscillator stabilization. Access to the bit can be secured by RCC LSESEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV. 0 (B_0x0): LSE ready interrupt disabled 1 (B_0x1): LSE ready interrupt enabled |
| HSIRDYIE | HSI16 ready interrupt enable Set and cleared by software to enable/disable interrupt caused by the HSI16 oscillator stabilization. Access to the bit can be secured by RCC HSISEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV. 0 (B_0x0): HSI16 ready interrupt disabled 1 (B_0x1): HSI16 ready interrupt enabled |
| HSERDYIE | HSE32 ready interrupt enable Set and cleared by software to enable/disable interrupt caused by the HSE32 oscillator stabilization. Access to the bit can be secured by RCC HSESEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV. 0 (B_0x0): HSE32 ready interrupt disabled 1 (B_0x1): HSE32 ready interrupt enabled |
| PLL1RDYIE | PLL1 ready interrupt enable Set and cleared by software to enable/disable interrupt caused by PLL1 lock. Access to the bit can be secured by RCC PLL1SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with RCC SPRIV or when non-secure with RCC NSPRIV. 0 (B_0x0): PLL1 lock interrupt disabled 1 (B_0x1): PLL1 lock interrupt enabled |