TSOF=value1, FLEMD=value1, WLEMD=value1, TDSSM=value1, EOF=value1, HPCMD=value1, SOF=value1, TV=value1, TDVTR=value1, WA=value1, TE=value1, TVC=value1, SELMD=value1, TDEN=value1, WAMD=value1, TDV=value1
Transmit Control/Status Register
| WLEMD | WLE Mode 0 (value1): The automatic update of SCTR.WLE and TCSR.EOF is disabled. 1 (value2): The automatic update of SCTR.WLE and TCSR.EOF is enabled. |
| SELMD | Select Mode 0 (value1): The automatic update of PCR.CTR[23 :16] is disabled. 1 (value2): The automatic update of PCR.CTR[23 :16] is enabled. |
| FLEMD | FLE Mode 0 (value1): The automatic update of FLE is disabled. 1 (value2): The automatic update of FLE is enabled. |
| WAMD | WA Mode 0 (value1): The automatic update of bit WA is disabled. 1 (value2): The automatic update of bit WA is enabled. |
| HPCMD | Hardware Port Control Mode 0 (value1): The automatic update of bits SCTR.DSM and SCTR.HPCDIR is disabled. 1 (value2): The automatic update of bits SCTR.DSM and SCTR.HPCDIR is enabled. |
| SOF | Start Of Frame 0 (value1): The data word in TBUF is excluded from the frame. 1 (value2): The data word in TBUF is included as first word of a frame |
| EOF | End Of Frame 0 (value1): The data word in TBUF is not considered as last word of an SSC frame. 1 (value2): The data word in TBUF is considered as last word of an SSC frame. |
| TDV | Transmit Data Valid 0 (value1): The data word in TBUF is not valid for transmission. 1 (value2): The data word in TBUF is valid for transmission |
| TDSSM | TBUF Data Single Shot Mode 0 (value1): The data word in TBUF is not invalidated after it has been loaded into the transmit shift register 1 (value2): The data word in TBUF is invalidated after it has been loaded into the shift register |
| TDEN | TBUF Data Enable 0 (value1): A transmission start of the data word in TBUF is disabled 1 (value2): A transmission of the data word in TBUF can be started if TDV is 1. 2 (value3): A transmission of the data word in TBUF can be started if TDV is 1 while DX2S is 0. 3 (value4): A transmission of the data word in TBUF can be started if TDV is 1 while DX2S is 1. |
| TDVTR | TBUF Data Valid Trigger 0 (value1): Bit TCSR.TE is permanently set. 1 (value2): Bit TCSR.TE is set if DX2T becomes active while TDV is 1. |
| WA | Word Address 0 (value1): The data word in TBUF will be transmitted after a falling edge of WA has been detected (referring to PSR.WA). 1 (value2): The data word in TBUF will be transmitted after a rising edge of WA has been detected (referring to PSR.WA). |
| TSOF | Transmitted Start Of Frame 0 (value1): The latest data word transmission has not been started for the first word of a data frame. 1 (value2): The latest data word transmission has been started for the first word of a data frame. |
| TV | Transmission Valid 0 (value1): The latest start of a data word transmission has taken place while no valid data was available 1 (value2): The latest start of a data word transmission has taken place with valid data from TBUF. |
| TVC | Transmission Valid Cumulated 0 (value1): Since TVC has been set, at least one data buffer underflow condition has occurred. 1 (value2): Since TVC has been set, no data buffer underflow condition has occurred. |
| TE | Trigger Event 0 (value1): The trigger event has not yet been detected 1 (value2): The trigger event has been detected |