XOWDEN=value1, XOWDRES=value1, OWDRES=value1, DCO1PD=value1, OSC2H=value1, OSC2L=value1, OWDEN=value1
Oscillator Control and Status Register
| OSC2L | Oscillator Valid Low Status Bit 0 (value1): The OSC frequency is usable 1 (value2): The OSC frequency is not usable. Frequency is too low. |
| OSC2H | Oscillator Valid High Status Bit 0 (value1): The OSC frequency is usable 1 (value2): The OSC frequency is not usable. Frequency is too high. |
| DCO1PD | DCO1 Power down 0 (value1): DCO1 is not power down 1 (value2): DCO1 power down. |
| OWDRES | Oscillator Watchdog Reset 0 (value1): The Oscillator Watchdog is not cleared and remains active 1 (value2): The Oscillator Watchdog is cleared and restarted. The OSC2L and OSC2H flag will be held in the last value until it is updated after 3 standby clock cycles. |
| OWDEN | Oscillator Watchdog Enable 0 (value1): The Oscillator Watchdog is disabled 1 (value2): The Oscillator Watchdog is enabled |
| XOWDRES | XTAL Oscillator Watchdog Reset 0 (value1): The Oscillator Watchdog is not cleared and remains active 1 (value2): The Oscillator Watchdog is cleared and restarted. |
| XOWDEN | XTAL Oscillator Watchdog Enable 0 (value1): The XTAL Oscillator Watchdog is disabled 1 (value2): The XTAL Oscillator Watchdog is enabled |