PLSW=value1, PLXC=value1, PLEC=value1, PLCL=value1, IPLS=value1, PSL=value1
Passive level configuration
| IPLS | Clamping control signal selector 0 (value1): HRPWMx.BLyA 1 (value2): HRPWMx.BLyB 2 (value3): HRPWMx.BLyC 3 (value4): HRPWMx.BLyD 4 (value5): HRPWMx.BLyE 5 (value6): HRPWMx.BLyF 6 (value7): HRPWMx.BLyG 7 (value8): HRPWMx.BLyH 8 (value9): HRPWMx.BLyI 9 (value10): HRPWMx.BLyJ 10 (value11): HRPWMx.BLyK 11 (value12): HRPWMx.BLyL 12 (value13): HRPWMx.BLyM 13 (value14): HRPWMx.BLyN 14 (value15): HRPWMx.BLyO 15 (value16): HRPWMx.BLyP |
| PLCL | Clamping control signal level selection 0 (value1): Clamping control disabled 1 (value2): Output is set to clamped level when the control signal is HIGH 2 (value3): Output is set to clamped level when the control signal is LOW |
| PSL | Output passive level value 0 (value1): Output clamped level is LOW 1 (value2): Output clamped level is HIGH |
| PLSW | Clamped state exit SW configuration 0 (value1): External signal and SW can remove the output from the clamped state 1 (value2): Only SW can remove the output from the clamped state |
| PLEC | Passive level enter configuration 0 (value1): Passive level is entered immediately 1 (value2): Passive level is entered only after the comparator output passes to LOW (output from the blanking stage) 2 (value3): Passive level is entered only after the comparator output passes to HIGH (output from the blanking stage) |
| PLXC | Passive level exit configuration 0 (value1): Passive level is exit immediately 1 (value2): Passive level is exit only after the comparator output passes to LOW (output from the blanking stage) 2 (value3): Passive level is exit only after the comparator output passes to HIGH (output from the blanking stage) |