AHOLDC=value1, CMDDELAY=value1, WAITRDC=value1, RDRECOVC=value1, ADDRC=value1, EXTDATA=value1, EXTCLOCK=value1, RDDTACS=value1
EBU Bus Read Access Parameter Register
| RDDTACS | Recovery Cycles between Different Regions 0 (value1): No Recovery Phase clock cycles available. 1 (value2): 1 clock cycle selected. 14 (value3): 14 clock cycles selected. 15 (value4): 15 clock cycles selected. |
| RDRECOVC | Recovery Cycles after Read Accesses 0 (value1): No Recovery Phase clock cycles available. 1 (value2): 1 clock cycle selected. 6 (value3): 6 clock cycles selected. 7 (value4): 7 clock cycles selected. |
| WAITRDC | Programmed Wait States for read accesses 0 (value1): 1 wait state. 1 (value2): 1 wait states. 2 (value3): 2 wait state. 30 (value4): 30 wait states. 31 (value5): 31 wait states. |
| DATAC | Data Hold Cycles for Read Accesses |
| EXTCLOCK | Frequency of external clock at pin BFCLKO 0 (value1): Equal to INT_CLK frequency. 1 (value2): 1/2 of INT_CLK frequency. 2 (value3): 1/3 of INT_CLK frequency. 3 (value4): 1/4 of INT_CLK frequency (default after reset). |
| EXTDATA | Extended data 0 (value1): external memory outputs data every BFCLK cycle 1 (value2): external memory outputs data every two BFCLK cycles 2 (value3): external memory outputs data every four BFCLK cycles 3 (value4): external memory outputs data every eight BFCLK cycles |
| CMDDELAY | Command Delay Cycles 0 (value1): 0 clock cycle selected. 1 (value2): 1 clock cycle selected. 14 (value3): 14 clock cycles selected. 15 (value4): 15 clock cycles selected. |
| AHOLDC | Address Hold Cycles 0 (value1): 0 clock cycle selected 1 (value2): 1 clock cycle selected 14 (value3): 14 clock cycles selected 15 (value4): 15 clock cycles selected |
| ADDRC | Address Cycles 0 (value1): 1 clock cycle selected 1 (value2): 1 clock cycle selected 14 (value3): 14 clock cycles selected 15 (value4): 15 clock cycles selected |