CTS=dis, BREAK=dis, RX_OVERRUN=dis, RX_FRAME_ERROR=dis, RX_FIFO_LVL=dis, TX_FIFO_AE=dis, RX_TO=dis, RX_PARITY_ERROR=dis, TX_FIFO_LVL=dis, LAST_BREAK=dis
Interrupt Enable Register.
| RX_FRAME_ERROR | Enable for RX Frame Error Interrupt. 0 (dis): RX Frame error interrupt disabled. 1 (en): RX Frame error interrupt enabled. |
| RX_PARITY_ERROR | Enable for RX Parity Error interrupt. 0 (dis): RX Parity error interrupt disabled. 1 (en): RX Parity error interrupt enabled. |
| CTS | Enable for CTS signal change interrupt. 0 (dis): CTS State Change interrupt disabled. 1 (en): CTS State Change interrupt enabled. |
| RX_OVERRUN | Enable for RX FIFO OVerrun interrupt. 0 (dis): RX Overrun interrupt disabled. 1 (en): RX Overrun interrupt enabled. |
| RX_FIFO_LVL | Enable for interrupt when RX FIFO reaches the number of bytes configured by the RXTHD field. 0 (dis): RX FIFO Threshold Level interrupt disabled. 1 (en): RX FIFO Threshold Level interrupt enabled. |
| TX_FIFO_AE | Enable for interrupt when TX FIFO has only one byte remaining. 0 (dis): TX FIFO One byte remaining (almost empty) interrupt disabled. 1 (en): TX FIFO one byte remaining (almost empty) interrupt enabled. |
| TX_FIFO_LVL | Enable for interrupt when TX FIFO reaches the number of bytes configured by the TXTHD field. 0 (dis): TX FIFO Threshold Level interrupt disabled. 1 (en): TX FIFO Threshold Level interrupt enabled. |
| BREAK | Enable for received BREAK character interrupt. 0 (dis): Break character received interrupt disabled. 1 (en): Break character recevied interrupt enabled. |
| RX_TO | Enable for RX Timeout Interrupt. Trigger if there is no RX communication during n UART characters (n=UART_CN.RXTO). 0 (dis): RX Timeout interrupt disabled. 1 (en): RX Timeout interrupt enabled. |
| LAST_BREAK | Enable for Last break character interrupt. 0 (dis): Last break frame received interrupt disabled. 1 (en): Last break frame received interrupt enabled. |