Regviz

Maxim-Integrated /max32662 /GCR /PM

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as PM

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/Maxim-Integrated/max32662/GCR/PM#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (active)MODE0 (dis)GPIO_WE 0 (RTC_WE)RTC_WE 0 (TMR3_WE)TMR3_WE 0 (AINCOMP_WE)AINCOMP_WE 0 (ERFO_BP)ERFO_BP

MODE=active, GPIO_WE=dis

Description

Power Management.

Fields

MODE

Operating Mode. This three bit field selects the current operating mode for the device. Note that code execution only occurs during ACTIVE mode.

0 (active): Active Mode.

4 (backup): Backup Mode.

7 (shutdown): Shutdown Mode
GPIO_WE

GPIO Wake Up Enable. This bit enables all GPIO pins as potential wakeup sources. Any GPIO configured for wakeup is capable of causing an exit from IDLE or STANDBY modes when this bit is set.

0 (dis): Wake Up Disable.

1 (en): Wake Up Enable.
RTC_WE

RTC Alarm Wake Up Enable. This bit enables RTC alarm as wakeup source. If enabled, the desired RTC alarm must be configured via the RTC control registers.
TMR3_WE

TMR3 (LPTMR0) Wake Up Enable. This bit enables TMR3 IRQ as wakeup source
AINCOMP_WE

AINCOMP Wake Up Enable. This bit enables the AINCOMP Timer as wakeup source.
ERFO_BP

ERFO Bypass

Links

()

Register Reference

https://github.com/analogdevicesinc/msdk