Power-On-Reset Controller Register
| POR_DIS_CODE | The register is used for the Power-On-Reset enable control. When power on, the POR circuit generates a reset signal to reset the whole chip function, but noise on the power may cause the POR active again. If set the POR_DIS_CODE equal to 0x5AA5, the POR reset function will be disabled and the POR function will re-active till the power voltage is lower to set the POR_DIS_CODE to another value or reset by chip other reset function. Include: PIN reset, Watch dog, LVR reset BOD reset, ICE reset command and the software-chip reset function This register is the protected register, program this need an open lock sequence, write “59h”,“16h”,“88h” to address 0x5000_0100 to un-lock this bit. Reference the register REGWRPROT at address GCR_BA + 0x100 |