Nuvoton /M05x_registers /GP0 /DBEN

P0 Input Signal De-bounce Enable DBEN[0] used to enable the de-bounce function for each corresponding bit. if the input signal pulse width can’t be sampled by continuous two de-bounce sample cycle. The input signal transition is seen as the signal bounce and will not trigger the interrupt. The DBEN[0] is used for “edge-trigger” interrupt only, and ignored for “level trigger” interrupt 0 = The bit[0] de-bounce function is disabled 1 = The bit[0] de-bounce function is enabled The de-bounce function is valid for edge triggered interrupt. if the interrupt mode is level triggered, the de-bounce enable bit is ignored.

P0 Input Signal De-bounce Enable DBEN[1] used to enable the de-bounce function for each corresponding bit. if the input signal pulse width can’t be sampled by continuous two de-bounce sample cycle. The input signal transition is seen as the signal bounce and will not trigger the interrupt. The DBEN[1] is used for “edge-trigger” interrupt only, and ignored for “level trigger” interrupt 0 = The bit[1] de-bounce function is disabled 1 = The bit[1] de-bounce function is enabled The de-bounce function is valid for edge triggered interrupt. if the interrupt mode is level triggered, the de-bounce enable bit is ignored.

P0 Input Signal De-bounce Enable DBEN[2] used to enable the de-bounce function for each corresponding bit. if the input signal pulse width can’t be sampled by continuous two de-bounce sample cycle. The input signal transition is seen as the signal bounce and will not trigger the interrupt. The DBEN[2] is used for “edge-trigger” interrupt only, and ignored for “level trigger” interrupt 0 = The bit[2] de-bounce function is disabled 1 = The bit[2] de-bounce function is enabled The de-bounce function is valid for edge triggered interrupt. if the interrupt mode is level triggered, the de-bounce enable bit is ignored.

P0 Input Signal De-bounce Enable DBEN[3] used to enable the de-bounce function for each corresponding bit. if the input signal pulse width can’t be sampled by continuous two de-bounce sample cycle. The input signal transition is seen as the signal bounce and will not trigger the interrupt. The DBEN[3] is used for “edge-trigger” interrupt only, and ignored for “level trigger” interrupt 0 = The bit[3] de-bounce function is disabled 1 = The bit[3] de-bounce function is enabled The de-bounce function is valid for edge triggered interrupt. if the interrupt mode is level triggered, the de-bounce enable bit is ignored.

P0 Input Signal De-bounce Enable DBEN[4] used to enable the de-bounce function for each corresponding bit. if the input signal pulse width can’t be sampled by continuous two de-bounce sample cycle. The input signal transition is seen as the signal bounce and will not trigger the interrupt. The DBEN[4] is used for “edge-trigger” interrupt only, and ignored for “level trigger” interrupt 0 = The bit[4] de-bounce function is disabled 1 = The bit[4] de-bounce function is enabled The de-bounce function is valid for edge triggered interrupt. if the interrupt mode is level triggered, the de-bounce enable bit is ignored.

P0 Input Signal De-bounce Enable DBEN[5] used to enable the de-bounce function for each corresponding bit. if the input signal pulse width can’t be sampled by continuous two de-bounce sample cycle. The input signal transition is seen as the signal bounce and will not trigger the interrupt. The DBEN[5] is used for “edge-trigger” interrupt only, and ignored for “level trigger” interrupt 0 = The bit[5] de-bounce function is disabled 1 = The bit[5] de-bounce function is enabled The de-bounce function is valid for edge triggered interrupt. if the interrupt mode is level triggered, the de-bounce enable bit is ignored.

P0 Input Signal De-bounce Enable DBEN[6] used to enable the de-bounce function for each corresponding bit. if the input signal pulse width can’t be sampled by continuous two de-bounce sample cycle. The input signal transition is seen as the signal bounce and will not trigger the interrupt. The DBEN[6] is used for “edge-trigger” interrupt only, and ignored for “level trigger” interrupt 0 = The bit[6] de-bounce function is disabled 1 = The bit[6] de-bounce function is enabled The de-bounce function is valid for edge triggered interrupt. if the interrupt mode is level triggered, the de-bounce enable bit is ignored.

P0 Input Signal De-bounce Enable DBEN[7] used to enable the de-bounce function for each corresponding bit. if the input signal pulse width can’t be sampled by continuous two de-bounce sample cycle. The input signal transition is seen as the signal bounce and will not trigger the interrupt. The DBEN[7] is used for “edge-trigger” interrupt only, and ignored for “level trigger” interrupt 0 = The bit[7] de-bounce function is disabled 1 = The bit[7] de-bounce function is enabled The de-bounce function is valid for edge triggered interrupt. if the interrupt mode is level triggered, the de-bounce enable bit is ignored.