Regviz

Nuvoton /NUC1xx_registers /GPA /IEN

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as IEN

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/Nuvoton/NUC1xx_registers/GPA/IEN#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (IF_EN0)IF_EN0 0 (IF_EN1)IF_EN1 0 (IF_EN2)IF_EN2 0 (IF_EN3)IF_EN3 0 (IF_EN4)IF_EN4 0 (IF_EN5)IF_EN5 0 (IF_EN6)IF_EN6 0 (IF_EN7)IF_EN7 0 (IF_EN8)IF_EN8 0 (IF_EN9)IF_EN9 0 (IF_EN10)IF_EN10 0 (IF_EN11)IF_EN11 0 (IF_EN12)IF_EN12 0 (IF_EN13)IF_EN13 0 (IF_EN14)IF_EN14 0 (IF_EN15)IF_EN15 0 (IR_EN0)IR_EN0 0 (IR_EN1)IR_EN1 0 (IR_EN2)IR_EN2 0 (IR_EN3)IR_EN3 0 (IR_EN4)IR_EN4 0 (IR_EN5)IR_EN5 0 (IR_EN6)IR_EN6 0 (IR_EN7)IR_EN7 0 (IR_EN8)IR_EN8 0 (IR_EN9)IR_EN9 0 (IR_EN10)IR_EN10 0 (IR_EN11)IR_EN11 0 (IR_EN12)IR_EN12 0 (IR_EN13)IR_EN13 0 (IR_EN14)IR_EN14 0 (IR_EN15)IR_EN15

Description

GPIO Port Interrupt Enable

Fields

IF_EN0

Port [A/B/C/D/E] Interrupt Enable by Input Falling Edge or Input Level Low IF_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IF_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “low” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “high-to-low” will generate the interrupt. 1 = Enable the PIN[n] state low-level or high-to-low change interrupt 0 = Disable the PIN[n] state low-level or high-to-low change interrupt
IF_EN1

Port [A/B/C/D/E] Interrupt Enable by Input Falling Edge or Input Level Low IF_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IF_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “low” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “high-to-low” will generate the interrupt. 1 = Enable the PIN[n] state low-level or high-to-low change interrupt 0 = Disable the PIN[n] state low-level or high-to-low change interrupt
IF_EN2

Port [A/B/C/D/E] Interrupt Enable by Input Falling Edge or Input Level Low IF_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IF_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “low” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “high-to-low” will generate the interrupt. 1 = Enable the PIN[n] state low-level or high-to-low change interrupt 0 = Disable the PIN[n] state low-level or high-to-low change interrupt
IF_EN3

Port [A/B/C/D/E] Interrupt Enable by Input Falling Edge or Input Level Low IF_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IF_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “low” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “high-to-low” will generate the interrupt. 1 = Enable the PIN[n] state low-level or high-to-low change interrupt 0 = Disable the PIN[n] state low-level or high-to-low change interrupt
IF_EN4

Port [A/B/C/D/E] Interrupt Enable by Input Falling Edge or Input Level Low IF_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IF_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “low” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “high-to-low” will generate the interrupt. 1 = Enable the PIN[n] state low-level or high-to-low change interrupt 0 = Disable the PIN[n] state low-level or high-to-low change interrupt
IF_EN5

Port [A/B/C/D/E] Interrupt Enable by Input Falling Edge or Input Level Low IF_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IF_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “low” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “high-to-low” will generate the interrupt. 1 = Enable the PIN[n] state low-level or high-to-low change interrupt 0 = Disable the PIN[n] state low-level or high-to-low change interrupt
IF_EN6

Port [A/B/C/D/E] Interrupt Enable by Input Falling Edge or Input Level Low IF_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IF_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “low” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “high-to-low” will generate the interrupt. 1 = Enable the PIN[n] state low-level or high-to-low change interrupt 0 = Disable the PIN[n] state low-level or high-to-low change interrupt
IF_EN7

Port [A/B/C/D/E] Interrupt Enable by Input Falling Edge or Input Level Low IF_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IF_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “low” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “high-to-low” will generate the interrupt. 1 = Enable the PIN[n] state low-level or high-to-low change interrupt 0 = Disable the PIN[n] state low-level or high-to-low change interrupt
IF_EN8

Port [A/B/C/D/E] Interrupt Enable by Input Falling Edge or Input Level Low IF_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IF_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “low” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “high-to-low” will generate the interrupt. 1 = Enable the PIN[n] state low-level or high-to-low change interrupt 0 = Disable the PIN[n] state low-level or high-to-low change interrupt
IF_EN9

Port [A/B/C/D/E] Interrupt Enable by Input Falling Edge or Input Level Low IF_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IF_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “low” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “high-to-low” will generate the interrupt. 1 = Enable the PIN[n] state low-level or high-to-low change interrupt 0 = Disable the PIN[n] state low-level or high-to-low change interrupt
IF_EN10

Port [A/B/C/D/E] Interrupt Enable by Input Falling Edge or Input Level Low IF_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IF_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “low” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “high-to-low” will generate the interrupt. 1 = Enable the PIN[n] state low-level or high-to-low change interrupt 0 = Disable the PIN[n] state low-level or high-to-low change interrupt
IF_EN11

Port [A/B/C/D/E] Interrupt Enable by Input Falling Edge or Input Level Low IF_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IF_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “low” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “high-to-low” will generate the interrupt. 1 = Enable the PIN[n] state low-level or high-to-low change interrupt 0 = Disable the PIN[n] state low-level or high-to-low change interrupt
IF_EN12

Port [A/B/C/D/E] Interrupt Enable by Input Falling Edge or Input Level Low IF_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IF_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “low” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “high-to-low” will generate the interrupt. 1 = Enable the PIN[n] state low-level or high-to-low change interrupt 0 = Disable the PIN[n] state low-level or high-to-low change interrupt
IF_EN13

Port [A/B/C/D/E] Interrupt Enable by Input Falling Edge or Input Level Low IF_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IF_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “low” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “high-to-low” will generate the interrupt. 1 = Enable the PIN[n] state low-level or high-to-low change interrupt 0 = Disable the PIN[n] state low-level or high-to-low change interrupt
IF_EN14

Port [A/B/C/D/E] Interrupt Enable by Input Falling Edge or Input Level Low IF_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IF_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “low” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “high-to-low” will generate the interrupt. 1 = Enable the PIN[n] state low-level or high-to-low change interrupt 0 = Disable the PIN[n] state low-level or high-to-low change interrupt
IF_EN15

Port [A/B/C/D/E] Interrupt Enable by Input Falling Edge or Input Level Low IF_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IF_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “low” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “high-to-low” will generate the interrupt. 1 = Enable the PIN[n] state low-level or high-to-low change interrupt 0 = Disable the PIN[n] state low-level or high-to-low change interrupt
IR_EN0

Port [A/B/C/D/E] Interrupt Enable by Input Rising Edge or Input Level High IR_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IR_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “high” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “low-to-high” will generate the interrupt. 1 = Enable the PIN[n] level-high or low-to-high interrupt 0 = Disable the PIN[n] level-high or low-to-high interrupt.
IR_EN1

Port [A/B/C/D/E] Interrupt Enable by Input Rising Edge or Input Level High IR_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IR_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “high” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “low-to-high” will generate the interrupt. 1 = Enable the PIN[n] level-high or low-to-high interrupt 0 = Disable the PIN[n] level-high or low-to-high interrupt.
IR_EN2

Port [A/B/C/D/E] Interrupt Enable by Input Rising Edge or Input Level High IR_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IR_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “high” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “low-to-high” will generate the interrupt. 1 = Enable the PIN[n] level-high or low-to-high interrupt 0 = Disable the PIN[n] level-high or low-to-high interrupt.
IR_EN3

Port [A/B/C/D/E] Interrupt Enable by Input Rising Edge or Input Level High IR_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IR_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “high” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “low-to-high” will generate the interrupt. 1 = Enable the PIN[n] level-high or low-to-high interrupt 0 = Disable the PIN[n] level-high or low-to-high interrupt.
IR_EN4

Port [A/B/C/D/E] Interrupt Enable by Input Rising Edge or Input Level High IR_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IR_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “high” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “low-to-high” will generate the interrupt. 1 = Enable the PIN[n] level-high or low-to-high interrupt 0 = Disable the PIN[n] level-high or low-to-high interrupt.
IR_EN5

Port [A/B/C/D/E] Interrupt Enable by Input Rising Edge or Input Level High IR_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IR_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “high” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “low-to-high” will generate the interrupt. 1 = Enable the PIN[n] level-high or low-to-high interrupt 0 = Disable the PIN[n] level-high or low-to-high interrupt.
IR_EN6

Port [A/B/C/D/E] Interrupt Enable by Input Rising Edge or Input Level High IR_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IR_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “high” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “low-to-high” will generate the interrupt. 1 = Enable the PIN[n] level-high or low-to-high interrupt 0 = Disable the PIN[n] level-high or low-to-high interrupt.
IR_EN7

Port [A/B/C/D/E] Interrupt Enable by Input Rising Edge or Input Level High IR_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IR_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “high” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “low-to-high” will generate the interrupt. 1 = Enable the PIN[n] level-high or low-to-high interrupt 0 = Disable the PIN[n] level-high or low-to-high interrupt.
IR_EN8

Port [A/B/C/D/E] Interrupt Enable by Input Rising Edge or Input Level High IR_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IR_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “high” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “low-to-high” will generate the interrupt. 1 = Enable the PIN[n] level-high or low-to-high interrupt 0 = Disable the PIN[n] level-high or low-to-high interrupt.
IR_EN9

Port [A/B/C/D/E] Interrupt Enable by Input Rising Edge or Input Level High IR_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IR_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “high” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “low-to-high” will generate the interrupt. 1 = Enable the PIN[n] level-high or low-to-high interrupt 0 = Disable the PIN[n] level-high or low-to-high interrupt.
IR_EN10

Port [A/B/C/D/E] Interrupt Enable by Input Rising Edge or Input Level High IR_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IR_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “high” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “low-to-high” will generate the interrupt. 1 = Enable the PIN[n] level-high or low-to-high interrupt 0 = Disable the PIN[n] level-high or low-to-high interrupt.
IR_EN11

Port [A/B/C/D/E] Interrupt Enable by Input Rising Edge or Input Level High IR_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IR_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “high” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “low-to-high” will generate the interrupt. 1 = Enable the PIN[n] level-high or low-to-high interrupt 0 = Disable the PIN[n] level-high or low-to-high interrupt.
IR_EN12

Port [A/B/C/D/E] Interrupt Enable by Input Rising Edge or Input Level High IR_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IR_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “high” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “low-to-high” will generate the interrupt. 1 = Enable the PIN[n] level-high or low-to-high interrupt 0 = Disable the PIN[n] level-high or low-to-high interrupt.
IR_EN13

Port [A/B/C/D/E] Interrupt Enable by Input Rising Edge or Input Level High IR_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IR_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “high” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “low-to-high” will generate the interrupt. 1 = Enable the PIN[n] level-high or low-to-high interrupt 0 = Disable the PIN[n] level-high or low-to-high interrupt.
IR_EN14

Port [A/B/C/D/E] Interrupt Enable by Input Rising Edge or Input Level High IR_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IR_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “high” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “low-to-high” will generate the interrupt. 1 = Enable the PIN[n] level-high or low-to-high interrupt 0 = Disable the PIN[n] level-high or low-to-high interrupt.
IR_EN15

Port [A/B/C/D/E] Interrupt Enable by Input Rising Edge or Input Level High IR_EN[n] used to enable the interrupt for each of the corresponding input GPIO_PIN[n]. Set bit to 1 also enable the pin wakeup function When set the IR_EN[n] bit to 1: If the interrupt is level trigger, the input PIN[n] state at level “high” will generate the interrupt. If the interrupt is edge trigger, the input PIN[n] state change from “low-to-high” will generate the interrupt. 1 = Enable the PIN[n] level-high or low-to-high interrupt 0 = Disable the PIN[n] level-high or low-to-high interrupt.

Links

()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data