LIN Break Failed Count Register.
| UA_LIN_BKFL | UART LIN Break Field Length This field indicates a 4-bit LIN TX break field count. NOTE: This break field length is UA_LIN_BKFL + 2 |
| LIN_RX_EN | LIN RX Enable 1 = Enable LIN RX mode. 0 = Disable LIN RX mode. |
| LIN_TX_EN | LIN TX Break Mode Enable 1 = Enable LIN TX Break mode. 0 = Disable LIN TX Break mode. NOTE: When TX break field transfer operation finish, this will be cleared automatically. |
| RS485_NMM | RS-485 Normal Multi-drop Operation Mode (NMM) (Low Density Only) 1 = Enable RS-485 Normal Multi-drop Operation Mode (NMM). 0 = Disable RS-485 Normal Multi-drop Operation Mode (NMM). Note: It can’t be active with RS485_AAD operation mode. |
| RS485_AAD | RS-485 Auto Address Detection Operation Mode (AAD) (Low Density Only) 1 = Enable RS-485 Auto Address Detection Operation Mode (AAD). 0 = Disable RS-485 Auto Address Detection Operation Mode (AAD). Note: It can’t be active with RS485_NMM operation mode. |
| RS485_AUD | RS-485 Auto Direction Mode (AUD) (Low Density Only) 1 = Enable RS-485 Auto Direction Operation Mode (AUO). 0 = Disable RS-485 Auto Direction Operation Mode (AUO). Note:This field is used for RS-485 any operation mode. Note: It can be active with RS-485_AAD or RS485_NMM operation mode. |
| RS485_ADD_EN | RS-485 Address Detection Enable (Low Density Only) 1 = Enable address detection mode. 0 = Disable address detection mode. Note: This field is used for RS485 any operation mode. |
| ADDR_MATCH | Address match value register (Low Density Only) This field contains the RS-485 address match values. Note: This field is used for RS-485 auto address detection mode. |