SQ8=B_0x0
channel selection register CHSELRMOD = 1 in ADC_CFGR1
| SQ1 | 1st conversion of the sequence These bits are programmed by software with the channel number (0…14) assigned to the 8th conversion of the sequence. 0b1111 indicates end of the sequence. When 0b1111 (end of sequence) is programmed to the lower sequence channels, these bits are ignored. Refer to SQ8[3:0] for a definition of channel selection. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). |
| SQ2 | 2nd conversion of the sequence These bits are programmed by software with the channel number (0…14) assigned to the 8th conversion of the sequence. 0b1111 indicates end of the sequence. When 0b1111 (end of sequence) is programmed to the lower sequence channels, these bits are ignored. Refer to SQ8[3:0] for a definition of channel selection. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). |
| SQ3 | 3rd conversion of the sequence These bits are programmed by software with the channel number (0…14) assigned to the 8th conversion of the sequence. 0b1111 indicates end of the sequence. When 0b1111 (end of sequence) is programmed to the lower sequence channels, these bits are ignored. Refer to SQ8[3:0] for a definition of channel selection. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). |
| SQ4 | 4th conversion of the sequence These bits are programmed by software with the channel number (0…14) assigned to the 8th conversion of the sequence. 0b1111 indicates end of the sequence. When 0b1111 (end of sequence) is programmed to the lower sequence channels, these bits are ignored. Refer to SQ8[3:0] for a definition of channel selection. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). |
| SQ5 | 5th conversion of the sequence These bits are programmed by software with the channel number (0…14) assigned to the 8th conversion of the sequence. 0b1111 indicates end of the sequence. When 0b1111 (end of sequence) is programmed to the lower sequence channels, these bits are ignored. Refer to SQ8[3:0] for a definition of channel selection. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). |
| SQ6 | 6th conversion of the sequence These bits are programmed by software with the channel number (0…14) assigned to the 8th conversion of the sequence. 0b1111 indicates end of the sequence. When 0b1111 (end of sequence) is programmed to the lower sequence channels, these bits are ignored. Refer to SQ8[3:0] for a definition of channel selection. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). |
| SQ7 | 7th conversion of the sequence These bits are programmed by software with the channel number (0…14) assigned to the 8th conversion of the sequence. 0b1111 indicates end of the sequence. When 0b1111 (end of sequence) is programmed to the lower sequence channels, these bits are ignored. Refer to SQ8[3:0] for a definition of channel selection. Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). |
| SQ8 | 8th conversion of the sequence These bits are programmed by software with the channel number (0…14) assigned to the 8th conversion of the sequence. 0b1111 indicates the end of the sequence. When 0b1111 (end of sequence) is programmed to the lower sequence channels, these bits are ignored. … Note: The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing). 0 (B_0x0): CH0 1 (B_0x1): CH1 12 (B_0xC): CH12 13 (B_0xD): CH13 14 (B_0xE): CH14 15 (B_0xF): No channel selected (End of sequence) |