Regviz

STMicroelectronics /STM32G081 /ADC /ADC_CALFACT

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as ADC_CALFACT

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/STMicroelectronics/STM32G081/ADC/ADC_CALFACT#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0CALFACT

Description

ADC Calibration factor

Fields

CALFACT

Calibration factor These bits are written by hardware or by software. Once a calibration is complete, they are updated by hardware with the calibration factors. Software can write these bits with a new calibration factor. If the new calibration factor is different from the current one stored into the analog ADC, it is then applied once a new calibration is launched. Just after a calibration is complete, DATA[6:0] contains the calibration factor. Note: Software can write these bits only when ADEN=1 (ADC is enabled and no calibration is ongoing and no conversion is ongoing). Refer to SQ8[3:0] for a definition of channel selection.

Links

()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data