ENVR=B_0x0, VRS=B_0x0, VRR=B_0x0, HIZ=B_0x0
VREFBUF control and status register
| ENVR | Voltage reference buffer mode enable This bit is used to enable the voltage reference buffer mode. 0 (B_0x0): Internal voltage reference mode disable (external voltage reference mode). 1 (B_0x1): Internal voltage reference mode (reference buffer enable or hold mode) enable. |
| HIZ | High impedance mode This bit controls the analog switch to connect or not the VREF+ pin. Refer to for the mode descriptions depending on ENVR bit configuration. 0 (B_0x0): VREF+ pin is internally connected to the voltage reference buffer output. 1 (B_0x1): VREF+ pin is high impedance. |
| VRS | Voltage reference scale This bit selects the value generated by the voltage reference buffer. 0 (B_0x0): Voltage reference set to VREF_OUT1 (around 2.048 V). 1 (B_0x1): Voltage reference set to VREF_OUT2 (around 2.5 V). |
| VRR | Voltage reference buffer ready 0 (B_0x0): the voltage reference buffer output is not ready. 1 (B_0x1): the voltage reference buffer output reached the requested level. |