FDCAN nominal bit timing and prescaler register
| NTSEG2 | Nominal time segment after sample point Valid values are 0 to 127. The actual interpretation by the hardware of this value is such that one more than the programmed value is used. |
| NTSEG1 | Nominal time segment before sample point Valid values are 0 to 255. The actual interpretation by the hardware of this value is such that one more than the programmed value is used. These are protected write (P) bits, write access is possible only when the bit 1 [CCE] and bit 0 [INIT] of CCCR register are set to 1. |
| NBRP | Bit rate prescaler Value by which the oscillator frequency is divided for generating the bit time quanta. The bit time is built up from a multiple of this quanta. Valid values are 0 to 511. The actual interpretation by the hardware of this value is such that one more than the value programmed here is used. These are protected write (P) bits, write access is possible only when the bit 1 [CCE] and bit 0 [INIT] of CCCR register are set to 1. |
| NSJW | Nominal (re)synchronization jump width Valid values are 0 to 127. The actual interpretation by the hardware of this value is such that the used value is the one programmed incremented by one. These are protected write (P) bits, write access is possible only when the bit 1 [CCE] and bit 0 [INIT] of CCCR register are set to 1. |