EGE=B_0x0, SOIE=B_0x0, SPOL=B_0x0, SE=B_0x0
DMAMUX request line multiplexer channel 6 configuration register
| DMAREQ_ID | DMA request identification Selects the input DMA request. See the DMAMUX table about assignments of multiplexer inputs to resources. |
| SOIE | Synchronization overrun interrupt enable 0 (B_0x0): Interrupt disabled 1 (B_0x1): Interrupt enabled |
| EGE | Event generation enable 0 (B_0x0): Event generation disabled 1 (B_0x1): Event generation enabled |
| SE | Synchronization enable 0 (B_0x0): Synchronization disabled 1 (B_0x1): Synchronization enabled |
| SPOL | Synchronization polarity Defines the edge polarity of the selected synchronization input: 0 (B_0x0): No event (no synchronization, no detection). 1 (B_0x1): Rising edge 2 (B_0x2): Falling edge 3 (B_0x3): Rising and falling edges |
| NBREQ | Number of DMA requests minus 1 to forward Defines the number of DMA requests to forward to the DMA controller after a synchronization event, and/or the number of DMA requests before an output event is generated. This field must only be written when both SE and EGE bits are low. |
| SYNC_ID | Synchronization identification Selects the synchronization input (see Table137: DMAMUX: assignment of synchronization inputs to resources). |