VALIDITY=B_0x0, CAPTURE_COEF=B_0x0, LATCH_COEF=B_0x0
ADC user control register
| I_APB_ADDR | Delayed write access address This bitfield contains the address that is being written during delayed write accesses. |
| I_APB_DATA | Delayed write access data This bitfield contains the data that are being written during delayed write accesses. |
| VALIDITY | Delayed write access status bit This bit indicates the communication status between the ADC digital and analog blocks. 0 (B_0x0): Operation still in progress 1 (B_0x1): Operation complete |
| LATCH_COEF | Calibration factor latch enable bit This bit latches the calibration factor in the CALFACT[31:0] bits. 0 (B_0x0): No effect 1 (B_0x1): Calibration factor latched in the analog block on LATCH_COEF bit transition from 0 to 1. Prior to latching the calibration factor, CALFACT[31:0] bits must be programmed with the content of CALINDEX[3:0] bits. |
| CAPTURE_COEF | Calibration factor capture enable bit This bit enables the internal calibration factor capture. 0 (B_0x0): Calibration factor not captured 1 (B_0x1): Calibration factor available in CALFACT[31:0] bits, the calibration factor index being defined by CALINDEX[3:0] bits |