ADC calibration factor register
| CALFACT | Linearity or offset calibration factor These bits can be written either by hardware or by software. They contain the 32-bit offset or linearity calibration factor. When CAPTURE_COEF is set to 1, the calibration factor of the analog block is read back and stored in CALFACT[31:0], indexed by CALINDEX[3:0] bits. When LATCH_COEF is set to 1, the calibration factor of the analog block is updated with the value programmed in CALFACT[31:0], indexed by CALINDEX[3:0] bits. To read all calibration factors, perform nine accesses to the ADC_CALFACT2 register. To write all calibration factors, perform eight accesses to the ADC_CALFACT2 register. Note: The software is allowed to write these bits only when ADEN = 1, ADSTART = 0 and JADSTART = 0 (ADC is enabled and no calibration is ongoing and no conversion is ongoing). |