TIM1 capture/compare register 3
| CCR3 | Capture/compare value If channel CC3 is configured as output: CCR3 is the value to be loaded in the actual capture/compare 3 register (preload value). It is loaded permanently if the preload feature is not selected in the TIMx_CCMR2 register (bit OC3PE). Else the preload value is copied in the active capture/compare 3 register when an update event occurs. The active capture/compare register contains the value to be compared to the counter TIMx_CNT and signaled on tim_oc3 output. Non-dithering mode (DITHEN = 0) The register holds the compare value in CCR3[15:0]. The CCR3[19:16] bits are reset. Dithering mode (DITHEN = 1) The register holds the integer part in CCR3[19:4]. The CCR3[3:0] bitfield contains the dithered part. If channel CC3 is configured as input: CCR3 is the counter value transferred by the last input capture 3 event (tim_ic3). The TIMx_CCR3 register is read-only and cannot be programmed. Non-dithering mode (DITHEN = 0) The register holds the capture value in CCR3[15:0]. The CCR3[19:16] bits are reset. Dithering mode (DITHEN = 1) The register holds the capture in CCR3[19:4]. The CCR3[3:0] bits are reset. |