FT13=B_0x0, FT7=B_0x0, FT0=B_0x0, FT10=B_0x0, FT5=B_0x0, FT1=B_0x0, FT11=B_0x0, FT12=B_0x0, FT4=B_0x0, FT6=B_0x0, FT3=B_0x0, FT8=B_0x0, FT9=B_0x0, FT15=B_0x0, FT2=B_0x0, FT14=B_0x0
EXTI falling trigger selection register 1
| FT0 | Falling trigger event configuration bit of configurable line x (x = 15 to 0). Each bit enables/disables the falling edge trigger for the event and interrupt on the corresponding line. The configurable lines are edge triggered; no glitch must be generated on these inputs. Note: If a falling edge on the configurable line occurs during writing of the register, the associated pending bit is not set. Falling edge trigger can be set for a line with rising edge trigger enabled. In this case, both edges generate a trigger. 0 (B_0x0): Disable 1 (B_0x1): Enable |
| FT1 | Falling trigger event configuration bit of configurable line x (x = 15 to 0). Each bit enables/disables the falling edge trigger for the event and interrupt on the corresponding line. The configurable lines are edge triggered; no glitch must be generated on these inputs. Note: If a falling edge on the configurable line occurs during writing of the register, the associated pending bit is not set. Falling edge trigger can be set for a line with rising edge trigger enabled. In this case, both edges generate a trigger. 0 (B_0x0): Disable 1 (B_0x1): Enable |
| FT2 | Falling trigger event configuration bit of configurable line x (x = 15 to 0). Each bit enables/disables the falling edge trigger for the event and interrupt on the corresponding line. The configurable lines are edge triggered; no glitch must be generated on these inputs. Note: If a falling edge on the configurable line occurs during writing of the register, the associated pending bit is not set. Falling edge trigger can be set for a line with rising edge trigger enabled. In this case, both edges generate a trigger. 0 (B_0x0): Disable 1 (B_0x1): Enable |
| FT3 | Falling trigger event configuration bit of configurable line x (x = 15 to 0). Each bit enables/disables the falling edge trigger for the event and interrupt on the corresponding line. The configurable lines are edge triggered; no glitch must be generated on these inputs. Note: If a falling edge on the configurable line occurs during writing of the register, the associated pending bit is not set. Falling edge trigger can be set for a line with rising edge trigger enabled. In this case, both edges generate a trigger. 0 (B_0x0): Disable 1 (B_0x1): Enable |
| FT4 | Falling trigger event configuration bit of configurable line x (x = 15 to 0). Each bit enables/disables the falling edge trigger for the event and interrupt on the corresponding line. The configurable lines are edge triggered; no glitch must be generated on these inputs. Note: If a falling edge on the configurable line occurs during writing of the register, the associated pending bit is not set. Falling edge trigger can be set for a line with rising edge trigger enabled. In this case, both edges generate a trigger. 0 (B_0x0): Disable 1 (B_0x1): Enable |
| FT5 | Falling trigger event configuration bit of configurable line x (x = 15 to 0). Each bit enables/disables the falling edge trigger for the event and interrupt on the corresponding line. The configurable lines are edge triggered; no glitch must be generated on these inputs. Note: If a falling edge on the configurable line occurs during writing of the register, the associated pending bit is not set. Falling edge trigger can be set for a line with rising edge trigger enabled. In this case, both edges generate a trigger. 0 (B_0x0): Disable 1 (B_0x1): Enable |
| FT6 | Falling trigger event configuration bit of configurable line x (x = 15 to 0). Each bit enables/disables the falling edge trigger for the event and interrupt on the corresponding line. The configurable lines are edge triggered; no glitch must be generated on these inputs. Note: If a falling edge on the configurable line occurs during writing of the register, the associated pending bit is not set. Falling edge trigger can be set for a line with rising edge trigger enabled. In this case, both edges generate a trigger. 0 (B_0x0): Disable 1 (B_0x1): Enable |
| FT7 | Falling trigger event configuration bit of configurable line x (x = 15 to 0). Each bit enables/disables the falling edge trigger for the event and interrupt on the corresponding line. The configurable lines are edge triggered; no glitch must be generated on these inputs. Note: If a falling edge on the configurable line occurs during writing of the register, the associated pending bit is not set. Falling edge trigger can be set for a line with rising edge trigger enabled. In this case, both edges generate a trigger. 0 (B_0x0): Disable 1 (B_0x1): Enable |
| FT8 | Falling trigger event configuration bit of configurable line x (x = 15 to 0). Each bit enables/disables the falling edge trigger for the event and interrupt on the corresponding line. The configurable lines are edge triggered; no glitch must be generated on these inputs. Note: If a falling edge on the configurable line occurs during writing of the register, the associated pending bit is not set. Falling edge trigger can be set for a line with rising edge trigger enabled. In this case, both edges generate a trigger. 0 (B_0x0): Disable 1 (B_0x1): Enable |
| FT9 | Falling trigger event configuration bit of configurable line x (x = 15 to 0). Each bit enables/disables the falling edge trigger for the event and interrupt on the corresponding line. The configurable lines are edge triggered; no glitch must be generated on these inputs. Note: If a falling edge on the configurable line occurs during writing of the register, the associated pending bit is not set. Falling edge trigger can be set for a line with rising edge trigger enabled. In this case, both edges generate a trigger. 0 (B_0x0): Disable 1 (B_0x1): Enable |
| FT10 | Falling trigger event configuration bit of configurable line x (x = 15 to 0). Each bit enables/disables the falling edge trigger for the event and interrupt on the corresponding line. The configurable lines are edge triggered; no glitch must be generated on these inputs. Note: If a falling edge on the configurable line occurs during writing of the register, the associated pending bit is not set. Falling edge trigger can be set for a line with rising edge trigger enabled. In this case, both edges generate a trigger. 0 (B_0x0): Disable 1 (B_0x1): Enable |
| FT11 | Falling trigger event configuration bit of configurable line x (x = 15 to 0). Each bit enables/disables the falling edge trigger for the event and interrupt on the corresponding line. The configurable lines are edge triggered; no glitch must be generated on these inputs. Note: If a falling edge on the configurable line occurs during writing of the register, the associated pending bit is not set. Falling edge trigger can be set for a line with rising edge trigger enabled. In this case, both edges generate a trigger. 0 (B_0x0): Disable 1 (B_0x1): Enable |
| FT12 | Falling trigger event configuration bit of configurable line x (x = 15 to 0). Each bit enables/disables the falling edge trigger for the event and interrupt on the corresponding line. The configurable lines are edge triggered; no glitch must be generated on these inputs. Note: If a falling edge on the configurable line occurs during writing of the register, the associated pending bit is not set. Falling edge trigger can be set for a line with rising edge trigger enabled. In this case, both edges generate a trigger. 0 (B_0x0): Disable 1 (B_0x1): Enable |
| FT13 | Falling trigger event configuration bit of configurable line x (x = 15 to 0). Each bit enables/disables the falling edge trigger for the event and interrupt on the corresponding line. The configurable lines are edge triggered; no glitch must be generated on these inputs. Note: If a falling edge on the configurable line occurs during writing of the register, the associated pending bit is not set. Falling edge trigger can be set for a line with rising edge trigger enabled. In this case, both edges generate a trigger. 0 (B_0x0): Disable 1 (B_0x1): Enable |
| FT14 | Falling trigger event configuration bit of configurable line x (x = 15 to 0). Each bit enables/disables the falling edge trigger for the event and interrupt on the corresponding line. The configurable lines are edge triggered; no glitch must be generated on these inputs. Note: If a falling edge on the configurable line occurs during writing of the register, the associated pending bit is not set. Falling edge trigger can be set for a line with rising edge trigger enabled. In this case, both edges generate a trigger. 0 (B_0x0): Disable 1 (B_0x1): Enable |
| FT15 | Falling trigger event configuration bit of configurable line x (x = 15 to 0). Each bit enables/disables the falling edge trigger for the event and interrupt on the corresponding line. The configurable lines are edge triggered; no glitch must be generated on these inputs. Note: If a falling edge on the configurable line occurs during writing of the register, the associated pending bit is not set. Falling edge trigger can be set for a line with rising edge trigger enabled. In this case, both edges generate a trigger. 0 (B_0x0): Disable 1 (B_0x1): Enable |