Regviz

stm32 /stm32c0 /STM32C071 /PWR /PWR_PDCRA

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as PWR_PDCRA

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/stm32/stm32c0/STM32C071/PWR/PWR_PDCRA#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (PD0)PD0 0 (PD1)PD1 0 (PD2)PD2 0 (PD3)PD3 0 (PD4)PD4 0 (PD5)PD5 0 (PD6)PD6 0 (PD7)PD7 0 (PD8)PD8 0 (PD9)PD9 0 (PD10)PD10 0 (PD11)PD11 0 (PD12)PD12 0 (PD13)PD13 0 (PD14)PD14 0 (PD15)PD15

Description

PWR Port A pull-down control register

Fields

PD0

Port A pull-down bit i Setting PDi bit while the APC bit of the PWR_CR3 register is set activates a pull-down device on the PA[i] I/O. Note: For the same pin, this pull-down device must not be activated when a pull-up device is set through the GPIOx_PUPDR register.
PD1

Port A pull-down bit i Setting PDi bit while the APC bit of the PWR_CR3 register is set activates a pull-down device on the PA[i] I/O. Note: For the same pin, this pull-down device must not be activated when a pull-up device is set through the GPIOx_PUPDR register.
PD2

Port A pull-down bit i Setting PDi bit while the APC bit of the PWR_CR3 register is set activates a pull-down device on the PA[i] I/O. Note: For the same pin, this pull-down device must not be activated when a pull-up device is set through the GPIOx_PUPDR register.
PD3

Port A pull-down bit i Setting PDi bit while the APC bit of the PWR_CR3 register is set activates a pull-down device on the PA[i] I/O. Note: For the same pin, this pull-down device must not be activated when a pull-up device is set through the GPIOx_PUPDR register.
PD4

Port A pull-down bit i Setting PDi bit while the APC bit of the PWR_CR3 register is set activates a pull-down device on the PA[i] I/O. Note: For the same pin, this pull-down device must not be activated when a pull-up device is set through the GPIOx_PUPDR register.
PD5

Port A pull-down bit i Setting PDi bit while the APC bit of the PWR_CR3 register is set activates a pull-down device on the PA[i] I/O. Note: For the same pin, this pull-down device must not be activated when a pull-up device is set through the GPIOx_PUPDR register.
PD6

Port A pull-down bit i Setting PDi bit while the APC bit of the PWR_CR3 register is set activates a pull-down device on the PA[i] I/O. Note: For the same pin, this pull-down device must not be activated when a pull-up device is set through the GPIOx_PUPDR register.
PD7

Port A pull-down bit i Setting PDi bit while the APC bit of the PWR_CR3 register is set activates a pull-down device on the PA[i] I/O. Note: For the same pin, this pull-down device must not be activated when a pull-up device is set through the GPIOx_PUPDR register.
PD8

Port A pull-down bit i Setting PDi bit while the APC bit of the PWR_CR3 register is set activates a pull-down device on the PA[i] I/O. Note: For the same pin, this pull-down device must not be activated when a pull-up device is set through the GPIOx_PUPDR register.
PD9

Port A pull-down bit i Setting PDi bit while the APC bit of the PWR_CR3 register is set activates a pull-down device on the PA[i] I/O. Note: For the same pin, this pull-down device must not be activated when a pull-up device is set through the GPIOx_PUPDR register.
PD10

Port A pull-down bit i Setting PDi bit while the APC bit of the PWR_CR3 register is set activates a pull-down device on the PA[i] I/O. Note: For the same pin, this pull-down device must not be activated when a pull-up device is set through the GPIOx_PUPDR register.
PD11

Port A pull-down bit i Setting PDi bit while the APC bit of the PWR_CR3 register is set activates a pull-down device on the PA[i] I/O. Note: For the same pin, this pull-down device must not be activated when a pull-up device is set through the GPIOx_PUPDR register.
PD12

Port A pull-down bit i Setting PDi bit while the APC bit of the PWR_CR3 register is set activates a pull-down device on the PA[i] I/O. Note: For the same pin, this pull-down device must not be activated when a pull-up device is set through the GPIOx_PUPDR register.
PD13

Port A pull-down bit i Setting PDi bit while the APC bit of the PWR_CR3 register is set activates a pull-down device on the PA[i] I/O. Note: For the same pin, this pull-down device must not be activated when a pull-up device is set through the GPIOx_PUPDR register.
PD14

Port A pull-down bit i Setting PDi bit while the APC bit of the PWR_CR3 register is set activates a pull-down device on the PA[i] I/O. Note: For the same pin, this pull-down device must not be activated when a pull-up device is set through the GPIOx_PUPDR register.
PD15

Port A pull-down bit i Setting PDi bit while the APC bit of the PWR_CR3 register is set activates a pull-down device on the PA[i] I/O. Note: For the same pin, this pull-down device must not be activated when a pull-up device is set through the GPIOx_PUPDR register.

Links

()

Register Reference

https://github.com/modm-io/cmsis-svd-stm32