Regviz

stm32 /stm32c0 /STM32C071 /PWR /PWR_PUCRA

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as PWR_PUCRA

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/stm32/stm32c0/STM32C071/PWR/PWR_PUCRA#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (PU0)PU0 0 (PU1)PU1 0 (PU2)PU2 0 (PU3)PU3 0 (PU4)PU4 0 (PU5)PU5 0 (PU6)PU6 0 (PU7)PU7 0 (PU8)PU8 0 (PU9)PU9 0 (PU10)PU10 0 (PU11)PU11 0 (PU12)PU12 0 (PU13)PU13 0 (PU14)PU14 0 (PU15)PU15

Description

PWR Port A pull-up control register

Fields

PU0

Port A pull-up bit i Setting PUi bit while the corresponding PDi bit is zero and the APC bit of the PWR_CR3 register is set activates a pull-up device on the PA[i] I/O. Note: For the same pin, this pull-up device must not be activated when a pull-down device is set through the GPIOx_PUPDR register.
PU1

Port A pull-up bit i Setting PUi bit while the corresponding PDi bit is zero and the APC bit of the PWR_CR3 register is set activates a pull-up device on the PA[i] I/O. Note: For the same pin, this pull-up device must not be activated when a pull-down device is set through the GPIOx_PUPDR register.
PU2

Port A pull-up bit i Setting PUi bit while the corresponding PDi bit is zero and the APC bit of the PWR_CR3 register is set activates a pull-up device on the PA[i] I/O. Note: For the same pin, this pull-up device must not be activated when a pull-down device is set through the GPIOx_PUPDR register.
PU3

Port A pull-up bit i Setting PUi bit while the corresponding PDi bit is zero and the APC bit of the PWR_CR3 register is set activates a pull-up device on the PA[i] I/O. Note: For the same pin, this pull-up device must not be activated when a pull-down device is set through the GPIOx_PUPDR register.
PU4

Port A pull-up bit i Setting PUi bit while the corresponding PDi bit is zero and the APC bit of the PWR_CR3 register is set activates a pull-up device on the PA[i] I/O. Note: For the same pin, this pull-up device must not be activated when a pull-down device is set through the GPIOx_PUPDR register.
PU5

Port A pull-up bit i Setting PUi bit while the corresponding PDi bit is zero and the APC bit of the PWR_CR3 register is set activates a pull-up device on the PA[i] I/O. Note: For the same pin, this pull-up device must not be activated when a pull-down device is set through the GPIOx_PUPDR register.
PU6

Port A pull-up bit i Setting PUi bit while the corresponding PDi bit is zero and the APC bit of the PWR_CR3 register is set activates a pull-up device on the PA[i] I/O. Note: For the same pin, this pull-up device must not be activated when a pull-down device is set through the GPIOx_PUPDR register.
PU7

Port A pull-up bit i Setting PUi bit while the corresponding PDi bit is zero and the APC bit of the PWR_CR3 register is set activates a pull-up device on the PA[i] I/O. Note: For the same pin, this pull-up device must not be activated when a pull-down device is set through the GPIOx_PUPDR register.
PU8

Port A pull-up bit i Setting PUi bit while the corresponding PDi bit is zero and the APC bit of the PWR_CR3 register is set activates a pull-up device on the PA[i] I/O. Note: For the same pin, this pull-up device must not be activated when a pull-down device is set through the GPIOx_PUPDR register.
PU9

Port A pull-up bit i Setting PUi bit while the corresponding PDi bit is zero and the APC bit of the PWR_CR3 register is set activates a pull-up device on the PA[i] I/O. Note: For the same pin, this pull-up device must not be activated when a pull-down device is set through the GPIOx_PUPDR register.
PU10

Port A pull-up bit i Setting PUi bit while the corresponding PDi bit is zero and the APC bit of the PWR_CR3 register is set activates a pull-up device on the PA[i] I/O. Note: For the same pin, this pull-up device must not be activated when a pull-down device is set through the GPIOx_PUPDR register.
PU11

Port A pull-up bit i Setting PUi bit while the corresponding PDi bit is zero and the APC bit of the PWR_CR3 register is set activates a pull-up device on the PA[i] I/O. Note: For the same pin, this pull-up device must not be activated when a pull-down device is set through the GPIOx_PUPDR register.
PU12

Port A pull-up bit i Setting PUi bit while the corresponding PDi bit is zero and the APC bit of the PWR_CR3 register is set activates a pull-up device on the PA[i] I/O. Note: For the same pin, this pull-up device must not be activated when a pull-down device is set through the GPIOx_PUPDR register.
PU13

Port A pull-up bit i Setting PUi bit while the corresponding PDi bit is zero and the APC bit of the PWR_CR3 register is set activates a pull-up device on the PA[i] I/O. Note: For the same pin, this pull-up device must not be activated when a pull-down device is set through the GPIOx_PUPDR register.
PU14

Port A pull-up bit i Setting PUi bit while the corresponding PDi bit is zero and the APC bit of the PWR_CR3 register is set activates a pull-up device on the PA[i] I/O. Note: For the same pin, this pull-up device must not be activated when a pull-down device is set through the GPIOx_PUPDR register.
PU15

Port A pull-up bit i Setting PUi bit while the corresponding PDi bit is zero and the APC bit of the PWR_CR3 register is set activates a pull-up device on the PA[i] I/O. Note: For the same pin, this pull-up device must not be activated when a pull-down device is set through the GPIOx_PUPDR register.

Links

()

Register Reference

https://github.com/modm-io/cmsis-svd-stm32