RRIF=B_0x0, BUSY=B_0x0, PLLLIF=B_0x0, ERIF=B_0x0, PLLLS=B_0x0, RRS=B_0x0, PLLUIF=B_0x0, TEIF=B_0x0
DSI Wrapper interrupt and status register
| TEIF | Tearing effect interrupt flag This bit is set when a tearing effect event occurs. 0 (B_0x0): No tearing effect event occurred 1 (B_0x1): Tearing effect event occurred |
| ERIF | End of refresh interrupt flag This bit is set when the transfer of a frame in adapted command mode is finished. 0 (B_0x0): No end of refresh event occurred 1 (B_0x1): End of refresh event occurred |
| BUSY | Busy flag This bit is set when the transfer of a frame in adapted command mode is ongoing. 0 (B_0x0): No transfer on going 1 (B_0x1): Transfer on going |
| PLLLS | PLL lock status This bit is set when the PLL is locked and cleared when it is unlocked. 0 (B_0x0): PLL is unlocked. 1 (B_0x1): PLL is locked. |
| PLLLIF | PLL lock interrupt flag This bit is set when the PLL becomes locked. 0 (B_0x0): No PLL lock event occurred 1 (B_0x1): PLL lock event occurred |
| PLLUIF | PLL unlock interrupt flag This bit is set when the PLL becomes unlocked. 0 (B_0x0): No PLL unlock event occurred 1 (B_0x1): PLL unlock event occurred |
| RRS | Regulator ready status This bit gives the status of the regulator. 0 (B_0x0): Regulator is not ready. 1 (B_0x1): Regulator is ready. |
| RRIF | Regulator ready interrupt flag This bit is set when the regulator becomes ready. 0 (B_0x0): No regulator ready event occurred 1 (B_0x1): Regulator ready event occurred |