TS1_AITLF=B_0x0, TS1_AITHF=B_0x0, TS1_AITEF=B_0x0, TS1_RDY=B_0x0, TS1_ITHF=B_0x0, TS1_ITLF=B_0x0, TS1_ITEF=B_0x0
Temperature sensor status register
| TS1_ITEF | Interrupt flag for end of measurement on temperature sensor 1, synchronized on PCLK. This bit is set by hardware when a temperature measure is done. It is cleared by software by writing 1 to the TS2_CITEF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_ITEFEN bit is set 0 (B_0x0): No end of measurement detected on temperature sensor 1 1 (B_0x1): End of measure detected on temperature sensor 1 |
| TS1_ITLF | Interrupt flag for low threshold on temperature sensor 1, synchronized on PCLK. This bit is set by hardware when the low threshold is set and reached. It is cleared by software by writing 1 to the TS1_CITLF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_ITLFEN bit is set 0 (B_0x0): Low threshold not reached on temperature sensor 1 1 (B_0x1): Low threshold reached on temperature sensor 1 |
| TS1_ITHF | Interrupt flag for high threshold on temperature sensor 1, synchronized on PCLK This bit is set by hardware when the high threshold is set and reached. It is cleared by software by writing 1 to the TS1_CITHF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_ITHFEN bit is set 0 (B_0x0): High threshold not reached on temperature sensor 1 1 (B_0x1): High threshold reached on temperature sensor 1 |
| TS1_AITEF | Asynchronous interrupt flag for end of measure on temperature sensor 1 This bit is set by hardware when a temperature measure is done. It is cleared by software by writing 1 to the TS1_CAITEF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_AITEFEN bit is set 0 (B_0x0): End of measure not detected on temperature sensor 1 1 (B_0x1): End of measure detected on temperature sensor 1 |
| TS1_AITLF | Asynchronous interrupt flag for low threshold on temperature sensor 1 This bit is set by hardware when the low threshold is reached. It is cleared by software by writing 1 to the TS1_CAITLF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_AITLFEN bit is set 0 (B_0x0): Low threshold not reached on temperature sensor 1 1 (B_0x1): Low threshold reached on temperature sensor 1 |
| TS1_AITHF | Asynchronous interrupt flag for high threshold on temperature sensor 1 This bit is set by hardware when the high threshold is reached. It is cleared by software by writing 1 to the TS1_CAITHF bit in the DTS_ICIFR register. Note: This bit is active only when the TS1_AITHFEN bit is set 0 (B_0x0): High threshold not reached on temperature sensor 1 1 (B_0x1): High threshold reached on temperature sensor 1 |
| TS1_RDY | Temperature sensor 1 ready flag This bit is set and reset by hardware. It indicates that a measurement is ongoing. 0 (B_0x0): Temperature sensor 1 busy 1 (B_0x1): Temperature sensor 1 ready |