OSPEED9=B_0x0, OSPEED6=B_0x0, OSPEED5=B_0x0, OSPEED10=B_0x0, OSPEED3=B_0x0, OSPEED11=B_0x0, OSPEED15=B_0x0, OSPEED7=B_0x0, OSPEED13=B_0x0, OSPEED12=B_0x0, OSPEED2=B_0x0, OSPEED8=B_0x0, OSPEED4=B_0x0, OSPEED0=B_0x0, OSPEED1=B_0x0, OSPEED14=B_0x0
GPIO port output speed register
| OSPEED0 | Port x configuration I/O pin y (y = 15 to 0) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED1 | Port x configuration I/O pin y (y = 15 to 0) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED2 | Port x configuration I/O pin y (y = 15 to 0) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED3 | Port x configuration I/O pin y (y = 15 to 0) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED4 | Port x configuration I/O pin y (y = 15 to 0) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED5 | Port x configuration I/O pin y (y = 15 to 0) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED6 | Port x configuration I/O pin y (y = 15 to 0) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED7 | Port x configuration I/O pin y (y = 15 to 0) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED8 | Port x configuration I/O pin y (y = 15 to 0) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED9 | Port x configuration I/O pin y (y = 15 to 0) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED10 | Port x configuration I/O pin y (y = 15 to 0) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED11 | Port x configuration I/O pin y (y = 15 to 0) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED12 | Port x configuration I/O pin y (y = 15 to 0) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED13 | Port x configuration I/O pin y (y = 15 to 0) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED14 | Port x configuration I/O pin y (y = 15 to 0) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |
| OSPEED15 | Port x configuration I/O pin y (y = 15 to 0) These bits are written by software to configure the I/O output speed. Note: Refer to the device datasheet for the frequency specifications and the power supply and load conditions for each speed. The bitfield is reserved and must be kept to reset value when the corresponding I/O is not available on the selected package. 0 (B_0x0): Low speed 1 (B_0x1): Medium speed 2 (B_0x2): High speed 3 (B_0x3): Very-high speed |