TAMP1TRG=B_0x0, TAMP2MSK=B_0x0, TAMP2TRG=B_0x0, TAMP2NOER=B_0x0, TAMP1NOER=B_0x0, BKBLOCK=B_0x0, TAMP1MSK=B_0x0
TAMP control register 2
| TAMP1NOER | Tamper 1 no erase 0 (B_0x0): Tamper 1 event erases the backup registers and all device secrets. 1 (B_0x1): Tamper 1 event does not erase the backup registers and device secrets. |
| TAMP2NOER | Tamper 2 no erase 0 (B_0x0): Tamper 2 event erases the backup registers and all device secretssup(1)/sup. 1 (B_0x1): Tamper 2 event does not erase the backup registers and device secretssup(2)/sup. |
| TAMP1MSK | Tamper 1 mask The tamper 1 interrupt must not be enabled when TAMP1MSK is set. 0 (B_0x0): Tamper 1 event generates a trigger event and TAMP1F must be cleared by software to allow next tamper event detection. 1 (B_0x1): Tamper 1 event generates a trigger event. TAMP1F is masked and internally cleared by hardware. The backup registers and device secretssup(1)/sup are not erased. |
| TAMP2MSK | Tamper 2 mask The tamper 2 interrupt must not be enabled when TAMP2MSK is set. 0 (B_0x0): Tamper 2 event generates a trigger event and TAMP2F must be cleared by software to allow next tamper event detection. 1 (B_0x1): Tamper 2 event generates a trigger event. TAMP2F is masked and internally cleared by hardware. The backup registers and device secretssup(1)/sup are not erased. |
| BKBLOCK | Backup registers and device secretssup(1)/sup access blocked 0 (B_0x0): backup registers and device secretssup(1)/sup can be accessed if no tamper flag is set 1 (B_0x1): backup registers and device secretssup(1)/sup cannot be accessed |
| BKERASE | Backup registers and device secretssup(1)/sup erase Writing ‘1’ to this bit reset the backup registers and device secretssup(1)/sup. Writing 0 has no effect. This bit is always read as 0. |
| TAMP1TRG | Active level for tamper 1 input If TAMPFLT = 00 Tamper 1 input rising edge triggers a tamper detection event. If TAMPFLT = 00 Tamper 1 input falling edge triggers a tamper detection event. 0 (B_0x0): If TAMPFLT different 00 Tamper 1 input staying low triggers a tamper detection event. 1 (B_0x1): If TAMPFLT different 00 Tamper 1 input staying high triggers a tamper detection event. |
| TAMP2TRG | Active level for tamper 2 input If TAMPFLT = 00 Tamper 2 input rising edge triggers a tamper detection event. If TAMPFLT = 00 Tamper 2 input falling edge triggers a tamper detection event. 0 (B_0x0): If TAMPFLT different 00 Tamper 2 input staying low triggers a tamper detection event. 1 (B_0x1): If TAMPFLT different 00 Tamper 2 input staying high triggers a tamper detection event. |