DBG_STOP=B_0x0, TRACE_IOEN=B_0x0, TRACE_MODE=B_0x0, TRACE_EN=B_0x0, DBG_STANDBY=B_0x0, DCRT=B_0x0
DBGMCU configuration register
| DBG_STOP | Allows debug in Stop mode 0 (B_0x0): normal operation 1 (B_0x1): automatic clock stop disabled |
| DBG_STANDBY | Allows debug in Standby mode 0 (B_0x0): normal operation 1 (B_0x1): automatic clock stop/power down disabled |
| TRACE_IOEN | trace pin enable 0 (B_0x0): disabled - trace pins not assigned 1 (B_0x1): enabled - trace pins assigned according to the value of TRACE_MODE field |
| TRACE_EN | trace port and clock enable. 0 (B_0x0): disabled 1 (B_0x1): enabled |
| TRACE_MODE | trace pin assignment 0 (B_0x0): trace pins assigned for asynchronous mode (TRACESWO) 1 (B_0x1): trace pins assigned for synchronous mode with a port width of 1 (TRACECK, TRACED0) 2 (B_0x2): trace pins assigned for synchronous mode with a port width of 2 ((TRACECK, TRACED0-1) 3 (B_0x3): trace pins assigned for synchronous mode with a port width of 4 ((TRACECK, TRACED0-3) |
| DCRT | Debug credentials reset type 0 (B_0x0): System reset 1 (B_0x1): Power reset |