WUPPUPD3=B_0x0, WUPPUPD8=B_0x0, WUPP6=B_0x0, WUPEN7=B_0x0, WUPEN6=B_0x0, WUPPUPD4=B_0x0, WUPP2=B_0x0, WUPEN3=B_0x0, WUPEN1=B_0x0, WUPPUPD6=B_0x0, WUPEN2=B_0x0, WUPPUPD7=B_0x0, WUPP7=B_0x0, WUPP3=B_0x0, WUPEN5=B_0x0, WUPPUPD1=B_0x0, WUPPUPD5=B_0x0, WUPPUPD2=B_0x0, WUPP8=B_0x0, WUPP4=B_0x0, WUPP1=B_0x0, WUPEN8=B_0x0, WUPEN4=B_0x0, WUPP5=B_0x0
PWR wake-up configuration register
| WUPEN1 | enable wake-up pin WUPx (x = 8 to 1) 0 (B_0x0): an event on WUPx pin does not wake-up the system from Standby mode. 1 (B_0x1): a rising or falling edge on WUPx pin wakes up the system from Standby mode. |
| WUPEN2 | enable wake-up pin WUPx (x = 8 to 1) 0 (B_0x0): an event on WUPx pin does not wake-up the system from Standby mode. 1 (B_0x1): a rising or falling edge on WUPx pin wakes up the system from Standby mode. |
| WUPEN3 | enable wake-up pin WUPx (x = 8 to 1) 0 (B_0x0): an event on WUPx pin does not wake-up the system from Standby mode. 1 (B_0x1): a rising or falling edge on WUPx pin wakes up the system from Standby mode. |
| WUPEN4 | enable wake-up pin WUPx (x = 8 to 1) 0 (B_0x0): an event on WUPx pin does not wake-up the system from Standby mode. 1 (B_0x1): a rising or falling edge on WUPx pin wakes up the system from Standby mode. |
| WUPEN5 | enable wake-up pin WUPx (x = 8 to 1) 0 (B_0x0): an event on WUPx pin does not wake-up the system from Standby mode. 1 (B_0x1): a rising or falling edge on WUPx pin wakes up the system from Standby mode. |
| WUPEN6 | enable wake-up pin WUPx (x = 8 to 1) 0 (B_0x0): an event on WUPx pin does not wake-up the system from Standby mode. 1 (B_0x1): a rising or falling edge on WUPx pin wakes up the system from Standby mode. |
| WUPEN7 | enable wake-up pin WUPx (x = 8 to 1) 0 (B_0x0): an event on WUPx pin does not wake-up the system from Standby mode. 1 (B_0x1): a rising or falling edge on WUPx pin wakes up the system from Standby mode. |
| WUPEN8 | enable wake-up pin WUPx (x = 8 to 1) 0 (B_0x0): an event on WUPx pin does not wake-up the system from Standby mode. 1 (B_0x1): a rising or falling edge on WUPx pin wakes up the system from Standby mode. |
| WUPP1 | wake-up pin polarity bit for WUPx (x = 8 to 1) 0 (B_0x0): detection on high level (rising edge) 1 (B_0x1): detection on low level (falling edge) |
| WUPP2 | wake-up pin polarity bit for WUPx (x = 8 to 1) 0 (B_0x0): detection on high level (rising edge) 1 (B_0x1): detection on low level (falling edge) |
| WUPP3 | wake-up pin polarity bit for WUPx (x = 8 to 1) 0 (B_0x0): detection on high level (rising edge) 1 (B_0x1): detection on low level (falling edge) |
| WUPP4 | wake-up pin polarity bit for WUPx (x = 8 to 1) 0 (B_0x0): detection on high level (rising edge) 1 (B_0x1): detection on low level (falling edge) |
| WUPP5 | wake-up pin polarity bit for WUPx (x = 8 to 1) 0 (B_0x0): detection on high level (rising edge) 1 (B_0x1): detection on low level (falling edge) |
| WUPP6 | wake-up pin polarity bit for WUPx (x = 8 to 1) 0 (B_0x0): detection on high level (rising edge) 1 (B_0x1): detection on low level (falling edge) |
| WUPP7 | wake-up pin polarity bit for WUPx (x = 8 to 1) 0 (B_0x0): detection on high level (rising edge) 1 (B_0x1): detection on low level (falling edge) |
| WUPP8 | wake-up pin polarity bit for WUPx (x = 8 to 1) 0 (B_0x0): detection on high level (rising edge) 1 (B_0x1): detection on low level (falling edge) |
| WUPPUPD1 | wake-up pin pull configuration for WKUPx (x = 8 to 1) 0 (B_0x0): no pull-up 1 (B_0x1): pull-up 2 (B_0x2): pull-down |
| WUPPUPD2 | wake-up pin pull configuration for WKUPx (x = 8 to 1) 0 (B_0x0): no pull-up 1 (B_0x1): pull-up 2 (B_0x2): pull-down |
| WUPPUPD3 | wake-up pin pull configuration for WKUPx (x = 8 to 1) 0 (B_0x0): no pull-up 1 (B_0x1): pull-up 2 (B_0x2): pull-down |
| WUPPUPD4 | wake-up pin pull configuration for WKUPx (x = 8 to 1) 0 (B_0x0): no pull-up 1 (B_0x1): pull-up 2 (B_0x2): pull-down |
| WUPPUPD5 | wake-up pin pull configuration for WKUPx (x = 8 to 1) 0 (B_0x0): no pull-up 1 (B_0x1): pull-up 2 (B_0x2): pull-down |
| WUPPUPD6 | wake-up pin pull configuration for WKUPx (x = 8 to 1) 0 (B_0x0): no pull-up 1 (B_0x1): pull-up 2 (B_0x2): pull-down |
| WUPPUPD7 | wake-up pin pull configuration for WKUPx (x = 8 to 1) 0 (B_0x0): no pull-up 1 (B_0x1): pull-up 2 (B_0x2): pull-down |
| WUPPUPD8 | wake-up pin pull configuration for WKUPx (x = 8 to 1) 0 (B_0x0): no pull-up 1 (B_0x1): pull-up 2 (B_0x2): pull-down |