ADSTP=B_0x0, DEEPPWD=B_0x0, ADVREGEN=B_0x0, JADSTP=B_0x0, ADSTART=B_0x0, ADEN=B_0x0, ADCALDIF=B_0x0, JADSTART=B_0x0, ADDIS=B_0x0, ADCAL=B_0x0
ADC control register
| ADEN | ADC enable control 0 (B_0x0): ADC is disabled (OFF state) 1 (B_0x1): Write 1 to enable the ADC. |
| ADDIS | ADC disable command 0 (B_0x0): no ADDIS command ongoing 1 (B_0x1): Write 1 to disable the ADC. |
| ADSTART | ADC start of regular conversion 0 (B_0x0): No ADC regular conversion is ongoing. 1 (B_0x1): Write 1 to start regular conversions. |
| JADSTART | ADC start of injected conversion 0 (B_0x0): No ADC injected conversion is ongoing. 1 (B_0x1): Write 1 to start injected conversions. |
| ADSTP | ADC stop of regular conversion command 0 (B_0x0): No ADC stop regular conversion command ongoing 1 (B_0x1): Write 1 to stop regular conversions ongoing. |
| JADSTP | ADC stop of injected conversion command 0 (B_0x0): No ADC stop injected conversion command ongoing 1 (B_0x1): Write 1 to stop injected conversions ongoing. |
| ADVREGEN | ADC voltage regulator enable 0 (B_0x0): ADC Voltage regulator disabled 1 (B_0x1): ADC Voltage regulator enabled. |
| DEEPPWD | Deep-power-down enable 0 (B_0x0): ADC not in Deep-power down 1 (B_0x1): ADC in Deep-power-down (default reset state) |
| ADCALDIF | Differential mode for calibration 0 (B_0x0): Writing ADCAL launches a calibration in single-ended inputs mode. 1 (B_0x1): Writing ADCAL launches a calibration in Differential inputs mode. |
| ADCAL | ADC calibration 0 (B_0x0): Calibration complete 1 (B_0x1): Write 1 to calibrate the ADC. |