IWDG_STDBY=B_0x0, NRST_STDBY=B_0x0, IO_VDDIO2_HSLV=B_0x0, IWDG_SW=B_0x0, WWDG_SW=B_0x0, IWDG_STOP=B_0x0, NRST_STOP=B_0x0, BORH_EN=B_0x0, IO_VDD_HSLV=B_0x0, SWAP_BANK=B_0x0
FLASH option status register
| BOR_LEV | Brownout level option status bit These bits reflects the power level that generates a system reset. 00 or 11: BOR Level 1, the threshold level is low (around 2.1V) 1 (B_0x1): BOR Level 2, the threshold level is medium (around 2.4V) 2 (B_0x2): BOR Level 3, the threshold level is high (around 2.7V) |
| BORH_EN | Brownout high enable 0 (B_0x0): disable 1 (B_0x1): enable |
| IWDG_SW | IWDG control mode option status bit 0 (B_0x0): IWDG watchdog is controlled by hardware 1 (B_0x1): IWDG watchdog is controlled by software |
| WWDG_SW | WWDG control mode option status bit 0 (B_0x0): WWDG watchdog is controlled by hardware 1 (B_0x1): WWDG watchdog is controlled by software |
| NRST_STOP | Core domain Stop entry reset option status bit 0 (B_0x0): a reset is generated when entering Stop mode on core domain 1 (B_0x1): no reset generated when entering Stop mode on core domain. |
| NRST_STDBY | Core domain Standby entry reset option status bit 0 (B_0x0): a reset is generated when entering Standby mode on core domain 1 (B_0x1): no reset generated when entering Standby mode on core domain. |
| PRODUCT_STATE | Life state code (based on Hamming 8,4). More information in Section7.6.11: Product state transitions. |
| IO_VDD_HSLV | High-speed IO at low Vsub DD/sub voltage configuration bit. This bit can be set only with Vsub DD/sub below 2.7V. 0 (B_0x0): High-speed IO at low Vsub DD/sub voltage feature disabled (Vsub DD/sub can exceed 2.7V) 1 (B_0x1): High-speed IO at low Vsub DD/sub voltage feature enabled (Vsub DD/sub remains below 2.7V) |
| IO_VDDIO2_HSLV | High-speed IO at low Vsub DDIO2/sub voltage configuration bit. This bit can be set only with Vsub DDIO2/sub below 2.7V. 0 (B_0x0): High-speed IO at low Vsub DDIO2/sub voltage feature disabled (Vsub DDIO2/sub can exceed 2.7V) 1 (B_0x1): High-speed IO at low Vsub DDIO2/sub voltage feature enabled (Vsub DDIO2/sub remains below 2.7V) |
| IWDG_STOP | IWDG Stop mode freeze option status bit When set the independent watchdog IWDG is in system Stop mode. 0 (B_0x0): Independent watchdog frozen in system Stop mode 1 (B_0x1): Independent watchdog keep running in system Stop mode. |
| IWDG_STDBY | IWDG Standby mode freeze option status bit When set the independent watchdog IWDG is frozen in system Standby mode. 0 (B_0x0): Independent watchdog frozen in Standby mode 1 (B_0x1): Independent watchdog keep running in Standby mode. |
| BOOT_UBE | Available only on cryptography enabled devices. Unique boot entry control, selects either ST or OEM iRoT for secure boot. 180 (B_0xB4): OEM-iRoT (user flash) selected. In Open PRODUCT_STATE this value selects bootloader. Defaut value. 195 (B_0xC3): ST-iRoT (system flash) selected |
| SWAP_BANK | Bank swapping option status bit SWAP_BANK reflects whether Bank1 and Bank2 are swapped or not. SWAP_BANK is loaded to SWAP_BANK of FLASH_OPTCR after a reset. 0 (B_0x0): Bank1 and Bank2 not swapped 1 (B_0x1): Bank1 and Bank2 swapped |