Regviz

stm32 /stm32h7 /STM32H723 /ADC1 /ADC_CALFACT2

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as ADC_CALFACT2

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/stm32/stm32h7/STM32H723/ADC1/ADC_CALFACT2#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0LINCALFACT

Description

ADC calibration factor register 2

Fields

LINCALFACT

Linearity Calibration Factor These bits are written by hardware or by software. They hold 30-bit out of the 160-bit linearity calibration factor. Once a single-ended inputs calibration is complete, they are updated by hardware with the calibration factors. Software can write these bits with a new calibration factor. If the new calibration factor is different from the current one stored into the analog ADC, it will then be applied once a new single-ended calibration is launched. Note: The software is allowed to write these bits only when ADEN=1, ADSTART=0 and JADSTART=0 (ADC is enabled and no calibration is ongoing and no conversion is ongoing).

Links

()

Register Reference

https://github.com/modm-io/cmsis-svd-stm32