CC1G=B_0x0, UG=B_0x0
TIM13 event generation register
| UG | Update generation This bit can be set by software, it is automatically cleared by hardware. 0 (B_0x0): No action 1 (B_0x1): Re-initialize the counter and generates an update of the registers. Note that the prescaler counter is cleared too (anyway the prescaler ratio is not affected). The counter is cleared. |
| CC1G | Capture/compare 1 generation This bit is set by software in order to generate an event, it is automatically cleared by hardware. If channel CC1 is configured as output: CC1IF flag is set, Corresponding interrupt or is sent if enabled. If channel CC1 is configured as input: The current value of the counter is captured in TIMx_CCR1 register. The CC1IF flag is set, the corresponding interrupt is sent if enabled. The CC1OF flag is set if the CC1IF flag was already high. 0 (B_0x0): No action 1 (B_0x1): A capture/compare event is generated on channel 1: |