JOVSE=B_0x0, ROVSM=B_0x0, OVSS=B_0x0, TROVS=B_0x0, OVSR=B_0x0, ROVSE=B_0x0
ADC configuration register 2
| ROVSE | Regular Oversampling Enable This bit is set and cleared by software to enable regular oversampling. Note: The software is allowed to write this bit only when ADSTART = 0 and JADSTART = 0 (which ensures that no conversion is ongoing) 0 (B_0x0): Regular Oversampling disabled 1 (B_0x1): Regular Oversampling enabled |
| JOVSE | Injected Oversampling Enable This bit is set and cleared by software to enable injected oversampling. Note: The software is allowed to write this bit only when ADSTART = 0 and JADSTART = 0 (which ensures that no conversion is ongoing) 0 (B_0x0): Injected Oversampling disabled 1 (B_0x1): Injected Oversampling enabled |
| OVSR | Oversampling ratio This bitfield is set and cleared by software to define the oversampling ratio. Note: The software is allowed to write these bits only when ADSTART = 0 (which ensures that no conversion is ongoing). 0 (B_0x0): 2x 1 (B_0x1): 4x 2 (B_0x2): 8x 3 (B_0x3): 16x 4 (B_0x4): 32x 5 (B_0x5): 64x 6 (B_0x6): 128x 7 (B_0x7): 256x |
| OVSS | Oversampling shift This bitfield is set and cleared by software to define the right shifting applied to the raw oversampling result. Other codes reserved Note: The software is allowed to write these bits only when ADSTART = 0 (which ensures that no conversion is ongoing). 0 (B_0x0): No shift 1 (B_0x1): Shift 1-bit 2 (B_0x2): Shift 2-bits 3 (B_0x3): Shift 3-bits 4 (B_0x4): Shift 4-bits 5 (B_0x5): Shift 5-bits 6 (B_0x6): Shift 6-bits 7 (B_0x7): Shift 7-bits 8 (B_0x8): Shift 8-bits |
| TROVS | Triggered Regular Oversampling This bit is set and cleared by software to enable triggered oversampling Note: The software is allowed to write this bit only when ADSTART = 0 (which ensures that no conversion is ongoing). 0 (B_0x0): All oversampled conversions for a channel are done consecutively following a trigger 1 (B_0x1): Each oversampled conversion for a channel needs a new trigger |
| ROVSM | Regular Oversampling mode This bit is set and cleared by software to select the regular oversampling mode. Note: The software is allowed to write this bit only when ADSTART = 0 (which ensures that no conversion is ongoing). 0 (B_0x0): Continued mode: When injected conversions are triggered, the oversampling is temporary stopped and continued after the injection sequence (oversampling buffer is maintained during injected sequence) 1 (B_0x1): Resumed mode: When injected conversions are triggered, the current oversampling is aborted and resumed from start after the injection sequence (oversampling buffer is zeroed by injected sequence start) |