CC1IF=B_0x0, CC2OF=B_0x0, CC2IF=B_0x0, CC1OF=B_0x0
LPTIM2 interrupt and status register [alternate]
| CC1IF | capture 1 interrupt flag 0 (B_0x0): No input capture occurred 1 (B_0x1): The counter value has been captured in the LPTIM_CCR1 register. (An edge has been detected on IC1 which matches the selected polarity). The CC1IF flag is automatically cleared by hardware once the captured value is read (CPU or DMA).CC1IF flag can be cleared by writing 1 to the CC1CF bit in the LPTIM_ICR register. |
| ARRM | Autoreload match |
| EXTTRIG | External trigger edge event |
| ARROK | Autoreload register update OK |
| UP | Counter direction change down to up |
| DOWN | Counter direction change up to down |
| UE | LPTIM update event occurred |
| REPOK | Repetition register update OK |
| CC2IF | Capture 2 interrupt flag 0 (B_0x0): No input capture occurred 1 (B_0x1): The counter value has been captured in the LPTIM_CCR2 register. (An edge has been detected on IC2 which matches the selected polarity). The CC2IF flag is automatically cleared by hardware once the captured value is read (CPU or DMA). The CC2IF flag can be cleared by writing 1 to the CC2CF bit in the LPTIM_ICR register. |
| CC1OF | Capture 1 over-capture flag 0 (B_0x0): No over-capture has been detected. 1 (B_0x1): The counter value has been captured in LPTIM_CCR1 register while CC1IF flag was already set. |
| CC2OF | Capture 2 over-capture flag 0 (B_0x0): No over-capture has been detected. 1 (B_0x1): The counter value has been captured in LPTIM_CCR2 register while CC2IF flag was already set. |
| DIEROK | Interrupt enable register update OK |