SDIS=B_0x0, TCTL=B_0x0, GINSTS=B_0x0, GONSTS=B_0x0
OTG device control register
| RWUSIG | Remote wake-up signaling |
| SDIS | Soft disconnect 0 (B_0x0): Normal operation. When this bit is cleared after a soft disconnect, the core generates a device connect event to the USB host. When the device is reconnected, the USB host restarts device enumeration. 1 (B_0x1): The core generates a device disconnect event to the USB host. |
| GINSTS | Global IN NAK status 0 (B_0x0): A handshake is sent out based on the data availability in the transmit FIFO. 1 (B_0x1): A NAK handshake is sent out on all non-periodic IN endpoints, irrespective of the data availability in the transmit FIFO. |
| GONSTS | Global OUT NAK status 0 (B_0x0): A handshake is sent based on the FIFO status and the NAK and STALL bit settings. 1 (B_0x1): No data is written to the Rx FIFO, irrespective of space availability. Sends a NAK handshake on all packets, except on SETUP transactions. All isochronous OUT packets are dropped. |
| TCTL | Test control 0 (B_0x0): Test mode disabled 1 (B_0x1): Test_J mode 2 (B_0x2): Test_K mode 3 (B_0x3): Test_SE0_NAK mode 4 (B_0x4): Test_Packet mode 5 (B_0x5): Test_Force_Enable |
| SGINAK | Set global IN NAK |
| CGINAK | Clear global IN NAK |
| SGONAK | Set global OUT NAK |
| CGONAK | Clear global OUT NAK |
| POPRGDNE | Power-on programming done |
| DSBESLRJCT | Deep sleep BESL reject |