UIFREMAP=B_0x0, DITHEN=B_0x0, CKD=B_0x0, ARPE=B_0x0, OPM=B_0x0, CEN=B_0x0, UDIS=B_0x0, URS=B_0x0
TIM11 control register 1
| CEN | Counter enable 0 (B_0x0): Counter disabled 1 (B_0x1): Counter enabled |
| UDIS | Update disable 0 (B_0x0): UEV enabled. An UEV is generated by one of the following events: 1 (B_0x1): UEV disabled. No UEV is generated, shadow registers keep their value (ARR, PSC, CCRx). The counter and the prescaler are reinitialized if the UG bit is set. |
| URS | Update request source 0 (B_0x0): Any of the following events generate an UEV if enabled: 1 (B_0x1): Only counter overflow generates an UEV if enabled. |
| OPM | One-pulse mode 0 (B_0x0): Counter is not stopped on the update event 1 (B_0x1): Counter stops counting on the next update event (clearing the CEN bit). |
| ARPE | Auto-reload preload enable 0 (B_0x0): TIMx_ARR register is not buffered 1 (B_0x1): TIMx_ARR register is buffered |
| CKD | Clock division 0 (B_0x0): t less than sub>DTS less than /sub> = t less than sub>tim_ker_ck less than /sub> 1 (B_0x1): t less than sub>DTS less than /sub> = 2 t less than sub>tim_ker_ck less than /sub> 2 (B_0x2): t less than sub>DTS less than /sub> = 4 t less than sub>tim_ker_ck less than /sub> |
| UIFREMAP | UIF status bit remapping 0 (B_0x0): No remapping. UIF status bit is not copied to TIMx_CNT register bit 31. 1 (B_0x1): Remapping enabled. UIF status bit is copied to TIMx_CNT register bit 31. |
| DITHEN | Dithering enable 0 (B_0x0): Dithering disabled 1 (B_0x1): Dithering enabled |