TS=B_0x0, SMS=B_0x0, SMSPE=B_0x0, MSM=B_0x0
TIM15 slave mode control register
| SMS | SMS[0]: Slave mode selection 0 (B_0x0): Slave mode disabled - if CEN = 1’ then the prescaler is clocked directly by the internal clock. 4 (B_0x4): Reset Mode - Rising edge of the selected trigger input (tim_trgi) reinitializes the counter and generates an update of the registers. 5 (B_0x5): Gated Mode - The counter clock is enabled when the trigger input (tim_trgi) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled. 6 (B_0x6): Trigger Mode - The counter starts at a rising edge of the trigger tim_trgi (but it is not reset). Only the start of the counter is controlled. 7 (B_0x7): External Clock Mode 1 - Rising edges of the selected trigger (tim_trgi) clock the counter. |
| TS | TS[0]: Trigger selection 0 (B_0x0): Internal Trigger 0 (tim_itr0) 1 (B_0x1): Internal Trigger 1 (tim_itr1) 2 (B_0x2): Internal Trigger 2 (tim_itr2) 3 (B_0x3): Internal Trigger 3 (tim_itr3) 4 (B_0x4): tim_ti1 Edge Detector (tim_ti1f_ed) 5 (B_0x5): Filtered Timer Input 1 (tim_ti1fp1) 6 (B_0x6): Filtered Timer Input 2 (tim_ti2fp2) |
| MSM | Master/slave mode 0 (B_0x0): No action 1 (B_0x1): The effect of an event on the trigger input (tim_trgi) is delayed to allow a perfect synchronization between the current timer and its slaves (through tim_trgo). It is useful if we want to synchronize several timers on a single external event. |
| SMS_1 | SMS[3] |
| TS_1 | TS[4:3] |
| SMSPE | SMS preload enable 0 (B_0x0): SMS[3:0] bitfield is not preloaded 1 (B_0x1): SMS[3:0] preload is enabled |