PCPOL=B_0x0, GAMEN=B_0x0, LTDCEN=B_0x0, HSPOL=B_0x0, SFSWTR=B_0x0, CRCEN=B_0x0, DEN=B_0x0, SFEN=B_0x0, DEPOL=B_0x0, VSPOL=B_0x0
LTDC global control register
| LTDCEN | LTDC global enable 0 (B_0x0): LTDC disabled 1 (B_0x1): LTDC enabled |
| GAMEN | Gamma correction enable 0 (B_0x0): Gamma correction disabled (pixels bypass the gamma operator) 1 (B_0x1): Gamma correction enabled |
| DBW | dither blue width |
| DGW | dither green width |
| DRW | dither red width |
| DEN | dither enable 0 (B_0x0): dither disabled 1 (B_0x1): dither enabled |
| CRCEN | CRC enable 0 (B_0x0): CRC disabled 1 (B_0x1): CRC enabled |
| SFEN | single-frame mode: mode enable 0 (B_0x0): single-frame disabled: a trigger (on SFSWTR) generates a continuous flow. 1 (B_0x1): single-frame enabled: a trigger (on SFSWTR) generates a single frame. |
| SFSWTR | single-frame mode: software trigger 0 (B_0x0): no action 1 (B_0x1): triggers one frame |
| PCPOL | pixel clock polarity 0 (B_0x0): the pixel and sync data are generated at the rising-edge of the output LCD_CLK clock. 1 (B_0x1): the pixel and sync data are generated at the falling-edge of the output LCD_CLK clock. |
| DEPOL | blanking (no data/pixel) polarity 0 (B_0x0): blanking (no data/pixel) polarity is active low. 1 (B_0x1): blanking (no data/pixel) polarity is active high. |
| VSPOL | vertical synchronization polarity 0 (B_0x0): vertical synchronization is active low. 1 (B_0x1): vertical synchronization is active high. |
| HSPOL | horizontal synchronization polarity 0 (B_0x0): horizontal synchronization polarity is active low. 1 (B_0x1): horizontal synchronization polarity is active high. |