L1RSMOK=B_0x0, SLPSTS=B_0x0, LPMACK=B_0x0, BESLTHRS=B_0x0, LPMEN=B_0x0, LPMRSP=B_0x0, BESL=B_0x0, ENBESL=B_0x0
OTG core LPM configuration register
| LPMEN | LPM support enable 0 (B_0x0): LPM capability is not enabled 1 (B_0x1): LPM capability is enabled |
| LPMACK | LPM token acknowledge enable 0 (B_0x0): NYET 1 (B_0x1): ACK |
| BESL | Best effort service latency 0 (B_0x0): 125 1 (B_0x1): 150 2 (B_0x2): 200 3 (B_0x3): 300 4 (B_0x4): 400 5 (B_0x5): 500 6 (B_0x6): 1000 7 (B_0x7): 2000 8 (B_0x8): 3000 9 (B_0x9): 4000 10 (B_0xA): 5000 11 (B_0xB): 6000 12 (B_0xC): 7000 13 (B_0xD): 8000 14 (B_0xE): 9000 15 (B_0xF): 10000 |
| REMWAKE | bRemoteWake value |
| L1SSEN | L1 Shallow Sleep enable |
| BESLTHRS | BESL threshold 0 (B_0x0): 75 1 (B_0x1): 100 2 (B_0x2): 150 3 (B_0x3): 250 4 (B_0x4): 350 5 (B_0x5): 450 6 (B_0x6): 950 |
| L1DSEN | L1 deep sleep enable |
| LPMRSP | LPM response 0 (B_0x0): ERROR (No handshake response) 1 (B_0x1): STALL 2 (B_0x2): NYET 3 (B_0x3): ACK |
| SLPSTS | Port sleep status 0 (B_0x0): Core not in L1 1 (B_0x1): Core in L1 |
| L1RSMOK | Sleep state resume OK 0 (B_0x0): The application or host cannot start resume from Sleep state 1 (B_0x1): The application or host can start resume from Sleep state |
| LPMCHIDX | LPM Channel Index |
| LPMRCNT | LPM retry count |
| SNDLPM | Send LPM transaction |
| LPMRCNTSTS | LPM retry count status |
| ENBESL | Enable best effort service latency 0 (B_0x0): The core works as described in the following document: 1 (B_0x1): The core works as described in the LPM Errata: |