STATUSREG register
| AESONFLYBUSY | AES on the fligh encryption busy status |
| NOTSUPPORTED_FUNCTION | indicates the SW requests an unsupported feature. |
| ADDPOINTERROR | Address Pointer Error status |
| RXOVERFLOWERROR | AHB arbiter is full and there is no more storage capability available in RX datapath |
| PREVTRANSMIT | Previous event was a Transmission (1) or Reception (0) status |
| SEQDONE | Sequencer end of task status. |
| TXERROR_0 | Transmission error 0 status: Transmit block missing data error. |
| TXERROR_1 | Transmission error 1 status |
| TXERROR_2 | Transmission error 2 status. |
| TXERROR_3 | Transmission error 3: error while waiting for the confirmation the Radio FSM is in TX state (timeout defined in GlobalStatMach. |
| TXERROR_4 | Transmission error 4 status |
| ENCERROR | Encryption error on receive status |
| ALLTABLEREADYERROR | All RAM Table not ready status |
| TXDATAREADYERROR | Transmit data pack not ready status. |
| NOACTIVELERROR | GlobalStatMach. |
| RCVLENGTHERROR | Receive length error status |
| SEMATIMEOUTERROR | Semaphore timeout error status |
| TXRXSKIP | Transmission/Reception skip status. |
| ACTIVE2ERROR | Indicates the Radio FSM was not in ACTIVE2 state when the Sequencer reaches the end of 1st INIT step. |
| CONFIGERROR | Data pointer configuration error status |
| TXOK | Previous transmitted packet received OK by the peer device status. |
| DONE | Receive/Transmit done status. |
| RCVTIMEOUT | Receive timeout status (no access address found) |
| RCVNOMD | Received MD bit status (valid only on Data Physical Channel PDU reception) |
| RCVCMD | Received command status (valid only on Data Physical Channel PDU reception). |
| TIMECAPTURETRIG | indicates a time has been captured in TIMERCAPTUREREG when set. |
| RCVCRCERR | Receive data fail (CRC error or invalid CI field) status. |
| RCVOK | Receive data OK status |